NewBeeDrone CinemAh 框架

NewBeeDrone-Archive

$ 89.99

Product Barcode: NBD755+ NBD755-8 + NBD1539
SKU: 08AH01 + 05AB10 + 00AL34

數量

Out Of Stock!

We will notify you when this product becomes available.

新的 Cinewhoop 設計理念

迄今為止，許多管道式電影框架都過於沉重。此外，現有的輕型電影百葉窗框架沒有用於圍繞較軟目標飛行的防護道具。無論是增加有效負載能力還是選擇更大的電池，沉重的框架都讓您在使用框架進行拍攝時的適應性空間很小。我們 NewBeeDrone 致力於改變這一現狀。

CinemAh 框架 - 最通用的 Cinewhoop 框架

CinemAh 框架是 NewBeeDrone 針對需要更輕、更通用的 cinewhoop 框架來攜帶完整 GoPro 的需求而推出的。 CinemAh 具有獨特的全碳纖維框架結構，可輕鬆存取電子設備，同時提供最大的結構強度。

GoPro 支架（不含）

NewBeeDrone CinemAh cinewhoop TPU GoPro 8 和 9 安裝座可讓 4 個內建角度，可從 0 度到 22.5 度快速調整。捕捉凸輪安裝座是 2xM2 安裝孔，間隔 20 毫米，可讓社群為任何高清捕捉凸輪選項設計任何安裝解決方案。

其他 3D 列印配件（不含）

查看我們完整的 Cinemah 3D 列印配件系列！除了運動相機支架之外，我們還提供卡入式管道、輕量電池帶和保護性管道蓋。

電子安裝：

2 組 1x1 吋安裝位置
前面 20x20 位置有用於飛行控制器和 ESC 堆疊的 M3 安裝。
後部 20x20 位置具有適用於 Caddx Vista 的 M2 安裝 - 帶有後部天線安裝座。
相機安裝 – 單螺絲和雙螺絲相機安裝選項。
注意：此框架不適合空氣裝置。

馬達安裝：直徑 12mm，4 孔圖案

建議馬達：14xx – 20xx

螺旋槳尺寸：

3吋或76毫米螺旋槳

重量：

78 克，附可調式 GoPro Hero8 安裝座和馬達螺絲
68 公克（不含 GoPro Hero 8 安裝座）
可下載的 3D 列印 TPU 卡入式導管 (x4) 總重 24 克 – 每個導管 6 克

包含在 CinemAh 框架包中

1 套碳纖維零件
1x 硬體套件

推薦零件：

如果您需要 3D 列印，請在這裡獲取！

3D 列印零件文件

第三方 3D 列印零件設計
Jason Suter 的 Caddx 花生山。謝謝傑森！

連結到手冊。

我們使用上述零件對4S和6S進行了調校，此調校是在betaflight韌體4.2.X下進行的。如果您使用的是 4.2.x，您可以直接複製文字並前往 CLI 命令進行貼上。它會自動儲存到您的 PID 和過濾器設定檔設定。設定檔 1 適用於 6S 設定，設定檔 2 適用於 4S 設置，請確保在設定中選擇正確的 PID 配置檔案以符合您的無人機配置。此PID也適用於任何betaflight 4.2.x版本下的飛行控制器，只要該飛行控制器使用MPU6000陀螺儀。我在下面提供的文本文檔僅包含 3 個不同配置文件的 PID 和過濾器資料。它不會更改飛行控制器上的任何其他設定。
關聯

建構影片：

Good product

thank you for the free gift.

This is complicated to build. But its so lightweight and you can throw it around like you would an open prop build. Love it

Good idea but fragile!

Like others here, I've enjoyed the drone and its handling/performance capabilities. However, today I was flying and came around the corner of a building and there was a dog that headed for the drone. I avoided him and clipped a small branch in the process. The drone came down and landed in the grass. I went over to flip it over and keep on flying as I've had similar crashes/rough landings. However, this time the frame was snapped in 3 or 4 different places. So now I have to buy a new frame, which is almost 1/4 the cost of a new drone, and spend hours pulling apart and reassembling most of it. I like the concept but it seems a bit fragile for this type of flying.

The Cinemah is an excellent idea but it needs to be stronger..

I love my cinemah, my build uses emax 2004 motors, dji vista and elrs as RX, the quad is very responsive and It is one on my favorites but the frame needs to be stronger.

The whole build was quite difficult to assemble, it is true what's being mentioned on other reviews, the small nuts make the whole build a huge pain in the bu** but once you are done you wont have to do that again, now in my case I broke my top place, right front duct (which is the reason for my 3 stars review, even though I think it is an excellent idea).

I was testing pos hold (my cinemah uses INAV) and it was hovering at less than 2 feet, by mistake I moved my roll stick and the quad to freak out and crashed upside down over grass and yep it broke...

I was very disappointed because it was only at 2 feet (less that 1 meter) over grass, and now I will have to disassemble the whole thing to replace the top plate, to be honest I'm not even sure I will do because again the whole build is quite a challenge.

I would suggest anyone that has the intention of building this quad to be extra careful and avoid crashing at ALL cost.. the frame wont hold.. granted this is not a bando frame but I wonder what would happen if you crash indoors and hit the floor... which is why I built this drone in the first place.

Thanks

Good quality!

My first experience with newbeedrone
Frame went together surprisingly good for the complex design
Looks awesome!

1 2