TrueRC Duality 2.4/5.8 GHz Stubby 4-Pack for DJI Goggles V2
TrueRC never stops! The Duality is a dual band CP omni covering both 2.4 and 5.8GHz bands in a single compact stubby package. Drop-in fit on the DJI FPV goggles V2*, letting you leaving them on at all times, thanks to a much lower profile than the stock linear antennas. Each unit is hand tuned on a professional analyzer so you get the most of your digital HD system.
SPECS:
Gain: 1.7dBic @2.4GHz, 2.8dBic @5.8GHz
Polarization:RHCP or LHCP
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth:2.39GHz-2.52GHz & 5.6GHz-6.1GHz
Radiation Efficiency:99%
SWR:<=1.5:1
Weight:5.25g
Dimensions:23.3mm dia. X 22.0mm height
Connector:RP-SMA
US. Pat. 10,804,618; Can. Pat. 2,968,566; and other pending patents.
**The Duality can be used on the DJI FPV goggles V1, however, since they won’t make use of the 2.4Ghz band, we suggest oursingularity 5.8 stubbyinstead.
Haven’t done any kind of proper distance or pen test, but they seem to work just fine for my purposes. Way shorter profile. I will say this, for the price, I was kind of expecting much harder plastic with some more heft. They def don’t feel like they should cost $100. So they better deliver on the signal, cause the materials do not feel premium.
D
Dominik Bečkovský
Awesum
Simply awesum
R
Ross peterson
Best antenna for dji v2 Goggle
I think these are the best for v2 goggles if u are flying the dji drone as well as using it with air units
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))