QuadrAnt™ for DJI Mini 4 Pro with RC 2 Drone Range Extender Directional Antenna Set
The QuadrAnt™ by WirEng® is a high gain directional antenna set dedicated to significantly extend your DJI Mini 4 Pro controlled by the RC 2 controller, for significantly increased range, reliability, operational stability, battery life, and invulnerability from external interferences.
The QuadrAnt™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your DJI Mini 4 Pro, or simply when your RC 2 operating range is not enough to satisfy your purposes.
The QuadrAnt™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the QuadrAnt™ by WirEng® is to significantly increase your RC 2 reach, however, the QuadrAnt™ is also recommended to stabilize your DJI Mini 4 Prooperation because it will provide your Mini 4 Prowith a very strong and reliable signal at any height, inclination, and operating distance, with possibly a longer battery life as an added benefit, since the drone's transmitter won't have to operate at maximum transmit power when far away.
The QuadrAnt™ by WirEng® is truly compatible with your RC 2 controller, because it supports all of its frequencies and modes of operation, which we carefully verified with the manufacturer's specifications. This QuadrAnt™set is made for the DJI Mini 4 Proand RC 2 controller, so if your drone-controller combination is different, please search our store for the correct combination, or contact us here for assistance.
The QuadrAnt™ by WirEng® comes with WirEng® extended 2-year warranty. Utility and Design Patents pending.
Main Features
The QuadrAnt™ replaces the two small RC 2antennas with four powerful WirEng® antennas with enhanced directivity and gain due to WirEng®'s MixPol™ technology, without the need of any controller modification (manufacturer warranty will not be voided).
Provided cables (if chosen) will connect directly to the RC 2 controller.
The QuadrAnt™ fully supports the RC 2 Automatic Frequency Hops (AFH) on all bands required by the RC 2 and Mini 4 Pro.
The QuadrAnt™ fully supports Frequency Hopping Spread Spectrum (FHSS) modality featured by the RC 2 and Mini 4 Pro.
The QuadrAnt™ fully supports the anti-jamming frequency hopping technology offered by both the RC 2 and Mini 4 Pro.
The QuadrAnt™ will increases the RC 2 reach, obtaining longer distances and increased stability and reliability for controlling the DJI Mini 4 Pro.
All RC 2controllerand Mini 4 Pro drone bands are supported by careful verification with DJI technical specifications.
* The QuadrAnt™ will also enhance your DJIMini 4 Pro controlled by the RC 2 controller operational reliability and stability.
The QuadrAnt™ will also likely enhance battery life, since the drone won't have to transmit at maximum power when far away from the controller.
The QuadrAnt™ includes 100% marine-grade stainless steel arm and reflector, made to withstand mission-critical situation and every possible weather condition.
Each QuadrAnt™ component is categorized as semi industrial grade (anti-UV ABS, splash-proof, and stainless steel hardware)
Each QuadrAnt™ element has a 24K gold plated N-Connector on its radome.
The QuadrAnt™ has an extended operating temperature of -25° to +85° C, for use in virtually any possible environment and weather condition.
The QuadrAnt™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than many times what's usually needed).
The QuadrAnt™ is strong and durable, for use even in difficult situations and environments.
The QuadrAnt™ has an IP67 rating (protected against dust, strong water jets, and water waves).
The QuadrAnt™ has a UL94 V-0 flammability rating
The QuadrAnt™ has USA and International trademarks current, and utilities and design patents pending.
Buy with confidence, the QuadrAnt™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty!
This 4 cell LiHv is great for flying slow and for long flight times on my 6 cell drone. Even though it's not the correct cell count, the LiHv 4.35 max voltage brings it closer into range.
I am kinda new to fpv drone flying but not new to RC and this radio is by far the best I’ve used. Definitely complicated and has a lot to lean but its loaded with features and is fully customizable and way more advanced then anything Ive used before. Coming from the Spektrum platform YouTube is your friend as there is a lot to learn.
had a few issues i used they ROBO 1002 and it fit fine without they carbon. but needs they carbon to hold battery had to use a mix of screws, had issues with props rubbing they frame with carbon using AZI props solved by not pressing props all the way down. I ordered they black and yellow, Black has a better mount for they antenna to keep in place !! yellow needs something to tie down
this gift would be nicer with a genuine properly welded whoop
Hello Franz,Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help. Thank you, NewBeeDrone Support