主要特點

  • 採用 CNC 加工航空級鋁製成。
  • Sticky360 迷你萬向節棒為標準配備。
  • 非接觸式霍爾感測器可實現精確的控制輸入和精確的對中。
  • 四重精密軸承帶來無與倫比的握桿感。
  • 可調式垂直行程角度(最小 38°,最大 54°)。
  • 專為 RadioMaster ZorroTX12客製設計。

規格

  • 名稱: AG01 迷你CNC霍爾雲台
  • 感測器類型:霍爾感測器
  • 工作電壓:直流3.3V
  • 線性度:即時(無延遲)
  • 垂直行程可調範圍:38°—54°
  • 自定心調節:是
  • 輕鬆模式調整
  • 可調式張力和棘輪:是
  • 四軸承:是
  • 溫度範圍:-20℃-85℃
  • 尺寸:49*42*48mm
  • 重量:42g(±0.3g)
AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro
AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro
AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro
AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro

AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro

佐羅和TX12的安裝

AG01 迷你萬向節預設為自定心出貨,並且與 Zorro 和 TX12 無線電相容。

尺寸

AG01 MINI CNC 霍爾萬向節適用於 TX12 和 Zorro

包裹

  • 2 * AG01 迷你霍爾CNC雲台
  • 2 * 六角工具
  • 8 * 安裝螺絲
  • 2 * 備用正常張力彈簧
  • 2 * 油門張緊螺絲

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Benjamin Kimmitt
AG01 the world

Put the minis in a jumper t lite. Love it. Needed small a sim controller.

D
David Sierocki
Amazing

Buttery smooth, amazing gimbals

T
T. Franks
SUPER EASY TO INSTALL

I had my TX12 for a few months before changing the stock gimballs because I didn't think I could swap them out as a newbie. I was wrong. This was so easy to do. Unscrew 4 (or 6? can't remember exactly) screws in the TX12, open the backing, pull 2 plug cables at each gimbal, unscrew 4 more screws, drop new gimbal in, screw 4 screws, plug two wires in, do same to other gimbal, and replace screws on back of TX. Job takes less than 20 minutes and you have amazingly smooth, stronger feeling gimbals. You have to screw in one screw on the gimbals itself to release the throttle stick so it doesn't self center. This was an EASY job.

C
Carlos Tovar
RadioMaster AG01-Mini Zorro & TX12 CNC Hall Gimbal - Set

Great addition to a great little budget radio! Can't ask for more! Would def recommend!

P
PC
Great upgrade!

Gives the Radio an overall premium feel.