Warning! The BeeBrainBLV4 OSD might not compatible with third party camera. If you are planning to use it for customized build, Please be aware it only support the camera below:
Weight: 6.5 grams (including antennas and battery connector)
Size: Outer dimensions 29 x 29 x 7.6 mm
Holes: 25.5 x 25.5 mm
Battery input: 1S
Connector: PH2.0
UART2 TX and RX for onboard EXPRESSLRS receiver (SX1280)
UART1 TX and RX free
VTX Adjustble power: 5mW-25mW-SmartMAX. SmartMAX will automatically adjust the VTX power according to the board temperature. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW
Note:Binding process. power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will get into binding mode. We are still trying to work on the ELRS firmware and make it able to just click the boot button to get into bind mode. Will get this update in the near future. Check out the video below CiottiFPV show you how to get into bind mode. - Thanks bro for showing this. lol
Awesome flight controller,installed on meteor65 air frame,NBD 0702 29kv flow motors,venom bi-blade props,bee eye camera on the Beebrain canopy powered by weebleed ph2.0 batteries. 👍🏿
D
Doug Jackson
Lost in ATL Post office
I'd love to love this AIO, but I can't. It's stuck somewhere in Atlanta along with the 4 pigtails I need to get my main 5" back in the air. Over 2 weeks and counting...
O
O.P.
Best 1-2S AIO in the market for analog FPV you can build up to the 3” toothpick size on this baddy. Have at least 4 of these getting beaten around no problems to date. One of them I accident wired the camera backwards and while I was not as quick to unplug the 5v BEC did not dry immediately in any given case. When in doubt buy more spares !
W
William Canady
2 out of 3 are great
I have 3 of these flight controllers and 2 of them are perfect other than slightly glitchy osd but not a huge problem. The 3rd and newest one I received has an issue after updating the receiver on the board to the same firmware as the other 2. After updating the receiver it has locked up and won't update or connect. After emailing newbeedrone about the issue they told me to do exactly what I told them I did already to try and get it working. Looks like I have a useless aio laying around now.
j
jeff h.
Not bad
Skeptical at first, I have purchased 3 of the blv4 fc and I began to notice they are all still flight worthy with video. I have a stack of 6 dead happy model x12 and f4 2.4
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.