G總結:

很高興向大家介紹GEP FC AIO的新成員,GEP-F4-35A,現已發布。

GEP-F4-35A是在GEP-F4-20A的基礎上開發的。它可以處理35A連續電流和(40A突發),完全支援2-6S鋰電池。可搭配1204/1404/1507/1805/2004馬達和2-5吋螺旋槳使用。支援OSD參數調整。 8.8g超輕重量,26.5mm*26.5mm安裝孔,適合市面上大部分鏡框。

規格:

  • 模型: GEP-F411-35A一體機
  • 單晶片: STM32F411
  • 慣性測量單元: ICM42688P陀螺儀/加速度計(SPI)
  • 目標: GEPRC_F411_AIO
  • 螢幕顯示: 附 AT7456Ev 的 Betaflight OSD
  • 串口連接埠: T1 R1 / T2 R2
  • 嘟: 是的
  • 引領: 是的
  • USB連接器: 微型USB
  • 電調單晶片: 8BB21F16G
  • 整合 LC 濾波器
  • 繼續當前: 35A
  • 突發電流: 40A(10秒)
  • 輸入電壓: 2~6S(鋰電池)
  • ESC協定: Dshot300/600、單發、連發
  • 黑盒子: 16Mb
  • ESC目標: G_H_30 BLS
  • 尺寸: 32x32mm 板
  • 安裝孔: 26.5×26.5毫米,M2
  • 重量: 8.8克

特徵:

  • BLhelis_ S 35A電調,支援2-6S LIPO電池輸入,可處理35A連續電流(40A突發),附電流表。
  • 主流STM32F411 FC,運作穩定。
  • MPU6000陀螺儀,8K取樣頻率。
  • 豐富的外部接口,支援蜂鳴器和LED燈功能。
  • 26.5mm*26.5mm安裝孔,超輕重量,適合市面上大部分車架。

包括:

  • 1 個 GEP-F4-35A-AIO
  • 1 x XT30-7CM-18AWG 電纜
  • 1×35V220UF電容
  • 8 x M2*6.5mm 阻尼環

手動的:

Customer Reviews

Based on 5 reviews
60%
(3)
20%
(1)
0%
(0)
0%
(0)
20%
(1)
E
Edward J
Perfect for the GEP 20!

Flys sweet!

E
Elchin
Escs don't work.

I installed this aio to cinelog30, but escs don't work, no beep when lipo connection and unable flash escs. I tried to flash escs via blheliS configurator, bluejay, jesc but the same result. I wrote to support but not answered me.

P
Peter E.
GepRC F411 35a aio whoop board

Bought this for my cinelog35 build and so far so good with only one annoying problem which is the osd, it seems to slowly dissapeared and slowly reappeared even when the quad is already flying while I am just seeing the quad being "armed" on screen. After that the osd layout shows on screen as I set it to be

S
Stephen Hansen
So far so good… bit drifty in angle mode.

Installed this on a cinelog 30 frame. Works well, just have to remember that the default has the FC turned at a 45 degree angle. I had to rotate yaw orientation -45 degrees to take off.

Horizon and acro mode work great.. a angle mode tends to drift significantly although probably something with vibrations I haven’t identified causing it.

R
Radial Flyer
GEPRC F411 35A AIO

This is a great AIO. I used it in a 5 inch Toothpick build, and am using 4S and 1507 motors. Flies great and responds well. Supports 3-6 S power and has 2 free UARTS. 26.5 mm mounting and supports buzzer and led.Solder pads are a little small though. I like it so much, I'm buying another for a 3 inch build.