After four months of hard work, DUAL ICM 20689 gyroscope both work at the same time,The new F4 Mini 20X20mm Important to release.
There are three versions. We strongly recommend the F7 Dual ICM20689 version, which is a one-off improvement.
Version as follows,STABLE V2 F4 30A(BLS 30A+F4+5.8G 600mw ),STABLE V2 F4 BL32 30A (BL32 35A+F4+5.8g 600mw),STABLE PRO F7 DUAL BL32 35A (BL32 35A+F7 DUAL ICM20689+5.8g 600mw), Pilots can choose as needed.
All three versions have a common feature that maximizes the minimalist layout structure, Highly integrated FPV required functions, perfect clean video output.
Innovative soft damping design to reduce flight control and gyroscope noise and reduce motor heat output
F7 Support both dual ICM20689 gyroscopes to work simultaneously, Exquisite and perfect flight experience
Innovative soft damping design, suitable for most frame, ensures flight control and gyroscope without noise
Simple installation method, compact space
STM32 F405 MCU or STM32F722RET6 MCU
Newly upgraded BLheli_32 ESC, high-speed operation, 35A stable working voltage, maximum 45A (3 seconds)
Support 2-6s battery and current meter
Support blackbox and use 32M on-board flash storage
8g VTX Support IRC protocol, PIT/ 25/100/200/600mw adjustable, 48 frequency
Mounting Holes: 20x20mm(M2)
Size: 26x26x21mm
Weight 16.5g (Including Wire and screws)
Include:
– 1 x F4 Flight Controller – 1 x BLheli_s 30A 2-5S ESC – 1 x 5.8g 600mW VTX – 1 x Antenna – 1 x Capacitance – 5 x cable set – 4 x M2*28mm screw – 16 x Soft silicone
I am kinda new to fpv drone flying but not new to RC and this radio is by far the best I’ve used. Definitely complicated and has a lot to lean but its loaded with features and is fully customizable and way more advanced then anything Ive used before. Coming from the Spektrum platform YouTube is your friend as there is a lot to learn.
had a few issues i used they ROBO 1002 and it fit fine without they carbon. but needs they carbon to hold battery had to use a mix of screws, had issues with props rubbing they frame with carbon using AZI props solved by not pressing props all the way down. I ordered they black and yellow, Black has a better mount for they antenna to keep in place !! yellow needs something to tie down
this gift would be nicer with a genuine properly welded whoop
Hello Franz,Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help. Thank you, NewBeeDrone Support
forgive waranty, buy an hot air soldering unit before !!!
Hello Franz,
Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help.