The iSDT D1Smart Dual Charger features AC/DC dual-mode, safe access, and support USB interference to help upgrade your firmware and always be updated with the latest updates to achieve max performance.
Specifications
Model No: D1
Input Voltage: AC 100~240V / DC 10~30V
Output voltage: DC 1~35V
Balance current: 1.5A/Cell Max
Max. input current: DC 14A
Charging current: 0.1~10A
Discharge current: 0.1~1.0A
Abnormal voltage alarm: Support
Max. charging power: AC 100W / DC 250W
Max. discharging power: 15W
Incorrect cell count setting alarm: Support
Supported battery types and cell count: LiFe, Lilon, LiPo1-6S, LiHv 1-6S, Pb 1-12S, NiMH, Cd 1-16S
Storage temperature: -20℃~60℃
Working temperature: 0~40℃
Dimension: 126x115x49mm
Weight: About 460g
Includes
1 x iSDT D1 AC 100W DC 250W 1-6S Dual Mode Smart Charger
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))