TS80P Transportable Soldering Iron Kit with USB-C Input
This Solder More Kit comes with everything you need to get soldering. It includes the soldering iron, power supply, and grounding cable.
TS80P is the upgrade version of TS80 Smart Soldering Iron. TS80P is a smart soldering iron powered by USB Type-C PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with PD2.0 (12V 3A)/QC3.0 (9V 2A) standard. Its output power has been increased from 18W to 30W max, with an 8-second heating time at fastest from room temperature to 300℃, meeting a wider range of soldering.
TS80P controller is made of aluminum alloy through CNC into a compact structure and high-tech design, ergonomic, beautiful and fashionable. The controller is also equipped with an OLED screen, so that you can monitor the status of the soldering iron at any time. Moreover, it features a brand new easy-push tip fastener, which provides a best holding experience and an easy push to loosen the soldering tip for quick replacement. With a built-in STM32 chip, TS80P can smartly control the rise and fall of tip temperature, and features sleep, automatic power-off, safety protection and other modes. The code application layer is open source; you can develop firmware for the soldering iron freely as needed.
TS80P shares the same tips with TS80. The soldering tip has an internal thermal ceramic heating core, and through the pure copper heat conduction, it can quickly transfer heat to the tip of soldering tip, achieving an excellent temperature control performance.
Features:
OLED screen, full body CNC aluminum alloy casing
USB Type-C 0/QC3.0 standardinput
Power increased from 18W to 30W max
Only 8s to heat from room temperature to 300℃
Brand new easy-push tip fastener, one push to loosen tips
Builtin smart chip for Port Protection
Share same tips with TS80
Specifications:
Temperature Range: 100℃- 400℃(Max)
Input: 9V 2A (QC 3.0)/ 12V 3A（PD2.0）
Power: 30W Max
Fastest heating time (from room temperature to 300℃): 8s
Data/Power Interface: USB Type-C
Temperature stability: ±3%
Display: OLED
Length: controller: 96mm; tip: 100mm(60+40mm)
Weight: 38g (power adaptor not included); Tip: 14g (B02 tip)
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
