This professional-grade RM3100 compass/magnetometer has impeccable signal-to-noise ratios, no drift, and precise magnetic field measurements. It can provideprofessional-grade heading accuracy and orientation calculations for your vehicle. With this compass, your vehicle can navigate through waypoints with little magnetic disturbance due to motor coils and metal parts. You can achieve the best result by placing this module far away from motor coils and other metal parts, getting rid of one of the largest points of failure on your unmanned vehicle.
This 3-axis magnetometer, based on PNI’s proprietary magneto-inductive technology, delivers high-performance resolution and repeatability. It has a very high level of resolution (10 nT) and ultra-low magnetic hysteresis, making it perfect for applications that require high heading accuracy.
With its DroneCAN output protocol, it can deliver robust and reliable connectivity over relatively large distances, and wiring is less complicated as you can have a single bus for connecting all your DroneCAN peripherals. It also does not occupy any serial ports on the flight controller.
Specification
Parameter
Cycle Counts
Units
50
100
200
Field Measurement Range
-800 to +800
μT
Gain
20
38
75
LSB/μT
Sensitivity
50
26
13
nT
Noise
30
20
15
nT
Max Single-Axis Sample Rate (Divide by 3 for Max. 3-Axis Sample Rate)
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
I had a very personable experience shopping with my drone your team took the time to help me purchase exactly what I and also identified the additional accessories that I may need to purchase that way I would not have post purchase regret. I will definitely be shopping there again for more flight systems and accessories.
