• Description

Check out our full offering for the ImpulseRC Apex here!

Introducing the ImpulseRC Wolf v3 OSD PDB

The new Wolf v3 in an exciting upgrade which now fits perfectly in the Apex and Reverb frames, as well as the legendary Alien with a simple 3D printable adapter.

The updated version 3 board is much smaller and lighter than the the previous Wolf, as well as having an all new graphical OSD overlay. This gives us lots of room to play with adding new features that take the ImpulseOSD firmware even further.

Designed from the ground up for intuitive ease-of-use, ImpulseOSD is a new software platform made in collaboration with Alexander Wolf, creator of the highly regarded KISS OSD.

We went back to the drawing board to reimagine how an OSD should work, keeping a focus on simplicity and auto-configuration while adding new smart features you didn't realise you were missing. ImpulseOSD running on the Wolf PDB offers a lot more than a barebones OSD added on to the side of your flight controller as an afterthought.

Get more stable loop times and consistently solid performance by letting your FC focus on what it does best: real-time flight control. Keep your UARTs for more important tasks and directly connect your peripherals to the Wolf PDB, including camera control, VTX control, GPS and LED strips.

Auto-Configuration

With our smart communication algorithms, no configuration is required to detect and work with your hardware. Connect any KISS, Betaflight or Butterflight FC and ImpulseOSD will intelligently switch modes to get the data it needs. Wire up a Tramp, Unify or other SmartAudio VTX and ImpulseOSD will take over full control of it automatically, without any setting changes required.

GPS Support

If you would like to try flying a little further than usual, simply solder a GPS to the PDB. The next time you power on, the hardware is detected and you will get a basic home arrow and distance without touching a thing. Dig a little in to the settings to get access to live efficiency calculations to find the most economical throttle range for your quad, experimental head home warnings and beacon mode to preserve battery life in the event of a failsafe and allow you to recover your quad. Also, yes, all of the entire GPS feature set is fully working on KISS, including streaming position data back to your Taranis via the flight controller.

Driverless GUI

Driver issues are a thing of the past. No COM ports, no DFU mode, no Zadig, you don't even need the ImpulseRC Driver Fixer. Connect via USB to your PC and we take care of the rest. Enjoy seamless upgrade flashing and full configuration of every feature using our advanced GUI software which works 100% driverless. As you drag items around on the screen, change settings or switch font, you can watch through your goggles to get instant live updates to give a real preview of your display.

Camera and VTX Control

Change camera settings in the field with a true analog output to help navigate your camera OSD using the sticks of your transmitter. We also included a dedicated serial port for camera control with the new Runcam digital protocol to make sure you are future proofed. ImpulseOSD stays in constant communication with your VTX to ensure it is always on the power and frequency you select. Set independent power levels for armed and disarmed states as well as access advanced features such as Pit Boot and Beacon Mode to really take things to the next level.

Multilingual

We are working with several well-known pilots in the community to bring full language translations of the OSD and its menus. Drop in to the OSD menus or the GUI to instantly change the language between English, French, German and Spanish.

Clean Power

Dual cascading switching and linear regulators with additional filters provide that silky-smooth power to your video components. Fully 6S capable out of the box, you no longer need to worry about voltage ranges or filtering when building your monster freestyle rig, we have you firmly covered.

Microphone

Quality mems microphone on board means you can get crisp audio piped directly back to your goggles and can hear exactly what your quad is doing in the air.

Documentation

Full documentation will be maintained as a Wiki on Github.

https://github.com/ImpulseRC/OSD

Software Download

Windows - Full featured, drag and drop¬†screen designer, configuration of all settings.

Mac - Simple tool for backup/restore and firmware update.

Description

Check out our full offering for the ImpulseRC Apex here!

Introducing the ImpulseRC Wolf v3 OSD PDB

The new Wolf v3 in an exciting upgrade which now fits perfectly in the Apex and Reverb frames, as well as the legendary Alien with a simple 3D printable adapter.

The updated version 3 board is much smaller and lighter than the the previous Wolf, as well as having an all new graphical OSD overlay. This gives us lots of room to play with adding new features that take the ImpulseOSD firmware even further.

Designed from the ground up for intuitive ease-of-use, ImpulseOSD is a new software platform made in collaboration with Alexander Wolf, creator of the highly regarded KISS OSD.

We went back to the drawing board to reimagine how an OSD should work, keeping a focus on simplicity and auto-configuration while adding new smart features you didn't realise you were missing. ImpulseOSD running on the Wolf PDB offers a lot more than a barebones OSD added on to the side of your flight controller as an afterthought.

Get more stable loop times and consistently solid performance by letting your FC focus on what it does best: real-time flight control. Keep your UARTs for more important tasks and directly connect your peripherals to the Wolf PDB, including camera control, VTX control, GPS and LED strips.

Auto-Configuration

With our smart communication algorithms, no configuration is required to detect and work with your hardware. Connect any KISS, Betaflight or Butterflight FC and ImpulseOSD will intelligently switch modes to get the data it needs. Wire up a Tramp, Unify or other SmartAudio VTX and ImpulseOSD will take over full control of it automatically, without any setting changes required.

GPS Support

If you would like to try flying a little further than usual, simply solder a GPS to the PDB. The next time you power on, the hardware is detected and you will get a basic home arrow and distance without touching a thing. Dig a little in to the settings to get access to live efficiency calculations to find the most economical throttle range for your quad, experimental head home warnings and beacon mode to preserve battery life in the event of a failsafe and allow you to recover your quad. Also, yes, all of the entire GPS feature set is fully working on KISS, including streaming position data back to your Taranis via the flight controller.

Driverless GUI

Driver issues are a thing of the past. No COM ports, no DFU mode, no Zadig, you don't even need the ImpulseRC Driver Fixer. Connect via USB to your PC and we take care of the rest. Enjoy seamless upgrade flashing and full configuration of every feature using our advanced GUI software which works 100% driverless. As you drag items around on the screen, change settings or switch font, you can watch through your goggles to get instant live updates to give a real preview of your display.

Camera and VTX Control

Change camera settings in the field with a true analog output to help navigate your camera OSD using the sticks of your transmitter. We also included a dedicated serial port for camera control with the new Runcam digital protocol to make sure you are future proofed. ImpulseOSD stays in constant communication with your VTX to ensure it is always on the power and frequency you select. Set independent power levels for armed and disarmed states as well as access advanced features such as Pit Boot and Beacon Mode to really take things to the next level.

Multilingual

We are working with several well-known pilots in the community to bring full language translations of the OSD and its menus. Drop in to the OSD menus or the GUI to instantly change the language between English, French, German and Spanish.

Clean Power

Dual cascading switching and linear regulators with additional filters provide that silky-smooth power to your video components. Fully 6S capable out of the box, you no longer need to worry about voltage ranges or filtering when building your monster freestyle rig, we have you firmly covered.

Microphone

Quality mems microphone on board means you can get crisp audio piped directly back to your goggles and can hear exactly what your quad is doing in the air.

Documentation

Full documentation will be maintained as a Wiki on Github.

https://github.com/ImpulseRC/OSD

Software Download

Windows - Full featured, drag and drop¬†screen designer, configuration of all settings.

Mac - Simple tool for backup/restore and firmware update.

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
0%
(0)
0%
(0)
33%
(1)
J
Jonathan Wardrip
Garbage

The pads popped off the moment I touched them with the soldering iron, I've never had an issue with that in the past. It is completely unusable. I contacted Newbeedrone who told me to contact impulserc and impulserc never responded to me. So I am out $40 for a completely faulty product.

B
BOTKILLER FPV
Works perfect

Definitely my goto piece of electronics when I need osd on my kiss setup. Though kiss is coming out with the ultra making these only necessary for the kiss v1 and v2

J
James
Newbeedrone has the best customer service in the industry!!!

I recently ordered a bunch of FPV parts from a few different online stores. This was my first experience ordering from newbeedrone.com and I’m very happy I did. These guys are awesome!!! After I placed my order I got an email saying they didn’t have one of the parts I needed in stock. RotorBob apologized and quickly refunded my account for the part. He also said he would include some extras with the rest of my order for the inconvenience. They shipped my order super fast and when I opened the box it was stuffed full of very useful extras included for free. The part they didn’t have was a simple $2 vtx mounting plate but they gave me over $60 worth of extras for free!

I made a similar order from another site and unfortunately they’re customer service sucked! They didn’t have a part I ordered and paid for, shipping took forever, they still haven’t refunded me for the part. When I got my order, parts were missing and no offer to compensate for the inconvenience… Never again dronecosmo.com, never again. They need to get a guy like RotorBob over there to step up their game.

Newbeedrone.com is where I’ll be doing all my FPV shopping from now on. Thank you guys for having huge parts selection, great prices and the best customer service in the industry! - James