The NewBeeDrone FLOW 1102 Motors fill the gap between 0802 and 1202 motors. It brings extra power to the Acrobee75 and MosquitoXL Frame. If you need to carry an HD System on both of the frame, this motor is a good option for the setup.
Specifications:
- 3.47g w/ wire
- Titanium Alloy TC4 Shaft
- NSK Ball Bearing
- 0.2mm Silicon Steel Sheets Core
- 50mm cable length with JST1.0 Plug to work with all BeeBrainBL Flight Controller
- 7075 Aluminum Alloy
- 10000KV for 2S battery / 19000KV for 1S battery
- 1.5mm shaft
- Whoop motor mount that can fit in with all Cockroach Frame and the Mosquito frame.
Put these on a mobula 7 and sheesh that bad boy rips. Great motors. Nbd flow line kills it!
D
Dan Sullinger
great motor
good for build
P
Przemek W.
Nice, smooth motors
These are very smooth and well made motors. Got them to upgrade 0802 motors on a heavier 75mm whoop built. They helped balance out the extra weight and give it some more flyability at the loss of some flight time. Great motors that run well.
P
Peter E.
NBD Flow 1102 19000kv
Bought these to try on a 2.5" 1s quad and it performs very well, smooth and efficient almost 4 minutes of fast maneuver flight time on 450mah.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
