The SmooX 2806.5 1750KV 4-6S Brushless Motors are one of Rcinpower's newer motors and are both stylish and efficient. They are acclaimed by many pilots as the most smooth and high-quality motors on the FPV market.
Specifications
KV: 1350KV / 1750KV ( Optional)
Color: Pink / Sliver ( Optional)
No. of Cells (Lipo): 4-6S
Version: CW Screw Thread
Quantity: One PC
Configuration: 12N14P
Stator Diameter: 28mm
Stator Length: 6.5mm
Shaft Diameter: 4mm ( Hollow)
Idle Current(10V): 1.2A @ 1350KV ; 1.65A @ 1750KV
Max. Con. Power (5S): 960W @ 1350KV; 1200W @ 1750KV
I fly a 6 inch quad with heavy batteries. Smoox 2806.5 with 6145 props gives instant reaction and smooth flying. The 1300kv are fast, smooth and torqued. The bearings last and the bell is one piece. These motors are a must with any cruiser. Or a heavy freestyle quad
J
Joseph Ballard
The name says it all
These are exactly as their name says smoox very smooth and powerful motors I will have to say that the only thing that is not positive is that these are not very tough motors I have been through 5 since I had my first flight 2 months ago I crash a Lot even cruzing on my 7" I take big risks and always looking for a gap or an opportunity to do a flip but for someone that is looking for a smooth reliable and powerful motor these I will vouch for are great for the price.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
