NewBeeDrone is dedicated to make the best FPV drone products in the industry.
Our latest propellers - the Azi Props started as a NewBeeLabs project that successfully turned into production for consumers.
Over the span of 9 months, we have worked intensively with our NewBeeLabs partner to make the most well rounded micro propellers to improve flight time, speed, and control. After dozens of iteration and months of testing, we were able to design these light weight propellers that are perfect for both freestyle and racing.
Without any compromise at top-end, bottom-end, or efficiency, we believe our Azi propellers will become the new industry standard.
Some notable characteristics of the Azi props include:
Linear feel for accurate throttle control
Faster spool up times giving you more "pop"
Grip in the corners to find and hold the best line possible
Higher top end speed to kill the straights
Bottom end grunt to give you that recovery you crave
Efficient without having to sacrifice bottom end grunt or top end speed (read magic)
This prop performs great and is quite rigid. Unfortunately if you like to explore different motor & prop combinations, they will not survive more that one change. The plastic formula used has too much rigidity, so the shaft hole will not retain much grip after it is removed the first time. Basically you'll be afraid to change props because it will be 1-4 dollars a shot, quite expensive!
A
Aaron Gjerde
NewBeeDrone Azi (Quad Blade) Micro Propellers 31mm -1.0mm Shaft (Set of 4)
I asked for these as a replacement and they arrived incredibly quickly and work really well. 4 stars!
These batteries performed noticeably better than the other 300mAh and 350 mAh batteries from competitors. If you're leisurely flying, the cheaper batteries will work, but if you want to have more power throughout the charge of the battery, these are better. On the downside, they cost more than the competition. Also, note that I soldered xt30 connectors because that was the connector on the drone we were using. So, I can't comment on the performance on the GNB27 connection
Works great. I've got 3 quads with this receiver now. It seems to be good quality, connected and flashed by wifi after soldering up. Binding went easily with the Radiomaster Pocket and I was off flying.