The BrotherHobby GOM 2207.5 Motor is your next big step in FPV Racing! The GOM is a high-quality motor made with Japanese NMB bearings for smooth, free, and quiet flying. The high-quality single piece bell increases the overall durability of the motor and prevents the motor from getting damaged during a crash.
Choose a KV option: 1750KV, 1920KV, 2500KV
Specifications
KV: 1750KV, 1920KV, 2500KV
Configuration: 12N14P
No.of Cells(Lipo): 4-6S
Rotor: N52H arc magnets
Copper wire: 260 ℃ Military grade
Stator: 0.15mm Nippon Steel silicon steel
Shaft: 0.15mm Nippon Steel silicon steel
Bearings: Japanese NMB 9x4x4mm
Wire AWG: 20AWG 16cm length
Bell cap: Al 7075
Base casing: Al 7075
Prop Adapter Shaft Thread: M5
Bolt Pattern: M3(16X16mm)
Includes
1 x BrotherHobby GOM 2207.5 1750KV/1920KV/2500KV Motor
These are great durable motors. However. At least with these models, my buddy bought 2 sets 2 different kv’s.
After trying to loosen the 1.5 mm screw on the bottom to release bell for cleaning, the screw on each one stripped out using a quality tool. Bummer. 4 motors are worthless because they have debris and can’t be cleaned
N
Nappy FPV
Nice
Nice and smooth. I’ve been running them for about a year. I finally had to buy more.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
