This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drone. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution which is already pre-load the Expresslrs firmware and it’s plug and play for Frsky X-lite/X-lite pro/X9 Lite , TBS Tango2.
This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250mw.
The slim pro TX module supports a maximum power output of about 1000mw, this would be very useful for Long Range FPV.
Features:
Supports up to 1000mw RF power (X-lite radio and Tango2 radio need external power supply) RGB LED ready Cooling Fan ready Open source ExpressLRS Long range, low latency and High re-flashed Rates Telemetry data transmission supported CNC aluminum protective shell
Specifications:
Regulatory Domain: ISM2400 MCU: ESP32(main),ESP8285(as ESP backpack) RF chip: SX1280IMLTRT Frsky Lite 8pin socket Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate: 25Hz RF Output Power: ≤30dBm Power supply voltage: 5v~12v Weight: 50gram (without antenna） Dimension: 67.5mm*30mm*20.5mm (without antenna) Antenna gain: 1.87dBi
Note: You can update firmware by ExpressLRS configurator or update the firmware via connect the Wifi hot spot of the “ExpressLRS TX Module”, visit "10.0.0.1" by browser (password:expresslrs)
Using on my FrSky X-Lite so far it’s working perfectly. Wish it came with a moxon antenna but for the price I can’t complain. Very happy with my purchase.
E
Edward Pruner
Wrong product
I ordered this thinking it was the t lite module pictured in the images but I received the x lite tango 2 slim pro module. Please correct the product description. The module should work with external bay add on but cannot use its full power as the t lite proprietary comes with a separate power board.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
Darren excelled in selecting the development kit and essential accessories that would have to purchase separately, ensuring I made an informed purchase. His attention to detail and dedication prevented any post-purchase disappointment. I am thoroughly pleased and grateful for his exceptional service.
An absolute pleasure to fly. Handles incredibly well and responds to any input just as I expected.
The only criticism is not of the performance of the drone. Unfortunately, it arrived with damage to the canopy. But I was still able to fly it and make initial observations.
Update process is cumbersome, better if done with the VTX out of the quad. Also the update port is much flimsier than the earlier 2 antenna versions, IMO.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
