The HDZero Race2 VTX is a digital HD 720p 60fps Shark Byte video transmitter capable of delivering 25/200mW switchable power on 5.8GHz. Designed for racing, this VTX has switchable power, 6s input, and weighs only 6.2g.
This VTX is easy to work with and has a mounting pattern that works with a lot of frames. There is a good way to secure antenna and MIPI cable and the board itself is thick. Great video reception and much cleaner than analog.
E
En_Cor
HDZero Race 2
Better than analog. No noticeable latency. Never feel disconnected from craft. Break up doesnt cause lag or frozen image.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
