With ViSense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer automatically enter into sleep mode at night to save power and not disturb.
Much Louder than Standard Buzzer
To easily find the lost drone in long distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100.
Two Options to Disarm the Buzzer
Option 1, Disarm with button: Disconnect main battery, hold disarm button on VIFLY Finder 2 for 1-5 seconds then release.
Option 2, Disarm with main battery: Disconnect main battery, then connect main battery for 3-6 seconds and disconnect it again.
It will beep 3 times when disarmed successfully.
Compatible with Both FPV quadcopter and RC Airplane
VIFLY finder 2 is programmed to be compatible with any flight controllers to support FPV quad, and receivers for RC airplane. No extra setting required, it will automatically recognize the device to connect.
Wiring Diagram
Simply connects the VIFLY Finder 2 to your flight controller(racing drone) or receiver(RC airplane) via 3 wires, and it’s ready to enjoy your flight.
Specs
Size(L x W x H):
Weight:
Volume:
Working Time:
Charge Time:
Battery:
Input Voltage:
24x13x16 mm
5 grams
Up to 105 dB
Up to 30 hours
1.5 hours
80mAh LiPo
4.5 - 8.5 V
Advice to setup this beeper on NewBeeDrone Infinity Flight controllers:
Power the beeper by the 5V and ground pads on the FC.
Connect the yellow signal wire to the BZ- pad, leave the BZ+ pad unused.
Within the CLI give this command and then also save:
While flying it lets me know if the battery is low... great beeper.... but it is loud which is good if I ever lose it.
N
Nik M
Don't lose your drone again
I consider these as essential to every quad I fly. They work great as a standard super loud beeper but if your battery ejects in a crash or you get stuck somewhere and you can't find it for hours (up to more than a day) the unit still works and will help you find your lost quad. A little big (about the size of a 1000uf cap) so plan your build accordingly.
J
JoeE
Useful!
have a bunch of these in different flavors and models/mfrs. prefer this one for most builds over the micro USB version (ViFly Buzzer), since you can easily wire to the FC. the micro-usb version has its place tho as a quick tape on finder for mine or a friends quad.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
Darren excelled in selecting the development kit and essential accessories that would have to purchase separately, ensuring I made an informed purchase. His attention to detail and dedication prevented any post-purchase disappointment. I am thoroughly pleased and grateful for his exceptional service.
An absolute pleasure to fly. Handles incredibly well and responds to any input just as I expected.
The only criticism is not of the performance of the drone. Unfortunately, it arrived with damage to the canopy. But I was still able to fly it and make initial observations.
Update process is cumbersome, better if done with the VTX out of the quad. Also the update port is much flimsier than the earlier 2 antenna versions, IMO.
