CUAV
CUAV Drone Pixhawk V5+ Flight Controller | Drone Autopilot PX4 APM
Regular price
$250.56
Regular price
Sale price
$250.56
CUAV Drone Pixhawk V5+ Flight Controller | Drone Autopilot PX4 APM
V5+ Autopilot
Interface standardization, rich I/O interface
Product description /V5+ flight controller
V5+ flight controller
V5+® is an advanced autopilot designed by CUAV® and the PX4 team and manufactured by CUAV. It is based on the Pixhawk FMUv5 design standard and is perfectly compatible with PX4 and ArduPilot firmware.
Previous
Next
Faster F765 processor
V5+ selects the STM32F765 processor with better performance. Its main frequency is up to 216MHZ and it contains 2MB FLASH/512K RAM. The clock speed is higher, the RAM is larger, and the speed will be greatly improved.
New FMUv5 hardware design
V5+ is a high-performance flight control system created by CUAV based on FMUv5 open source hardware. It has a more advanced processor than FMUv3, a larger FLASH and RAM, and a more stable and reliable sensor.
Support RTK centimeter positioning
V5+ supports RTK positioning module to achieve accurate centimeter positioning to meet your higher positioning requirements. (RTK positioning module needs to be purchased separately)
PX4 official standard
CUAV is a premium member of Dronecode and has been working to promote the PX4 open source project. The V5+ interface is designed according to the official PX4 standard to ensure compatibility and interoperability with hardware and software products in the PX4 ecosystem.
Multi-sensor redundancy combination
Built-in 5 sets of sensors, the flight controller monitors the multi-channel sensor data in real time, and performs redundant switching immediately after the failure, improving flight safety and stability.
Specifications /V5+ flight controller
| Hardware parameter | |
|---|---|
| Main processor | STM32F765 (32 Bit Arm® Cortex®-M7, 216MHz, 2MB flash, 512KB RAM) |
| Coprocessor | STM32F100 (32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM) |
| sensor | |
| Accelerometer | ICM-20602/ICM-20689/BMI055 |
| Gyro | ICM-20602/ICM-20689/BMI055 |
| Electronic compass | IST8310 |
| Barometer | MS5611 |
| External interface | |
| UART serial port | 5 |
| I2C | 4 |
| SPI | 1 |
| CAN | 2 |
| ADC | 2 |
| PWM output | 8-14 PWM outputs (6 from IO, 8 from FMU) |
| DSM/SBUS/RSSI | 1 |
| PPM IN | 1 |
| CAN buses | 2 |
| Analog inputs for voltage/current | 2 |
| GPS&Safety | 1 |
| Debug/F7 SWD interface | 1 |
| USB interface | 1(Type-C) |
| TF slot | 1 |
| Related interface protocol | |
| PPM IN | PPM |
| DSM/SBUS | DSM/SBUS;RSSI:PWM/3.3v analog voltage |
| GPS | NMEA/UBLOX |
| Support model | |
| PX4 and Ardupilot firmware | Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc. |
| Working environment and physical parameters | |
| Operating Voltage | 4.5 ~ 5.5 V |
| USB Input voltage | 5V +- 0.25v |
| Servo input voltage | 0-36v |
| Operating temperature | -20 ~ 85°c |
| size&weight | |
| Size | 85.5*42*33mm |
| Weight | 91g |
Material download /V5+flight controller
| Weight | 1 kg |
|---|---|
| Dimensions | 30 × 20 × 10 cm |
| V5+ Flighte controller |
V5+ Flight controller |