Holybro Tekko32 F4 Metal 65A 4in1 ESC

Holybro updated the Tekko32 with an F4 MCU which provides a smoother and faster motor response. With BLHeli_32 firmware, the PWM output can be raised to 96 kHz.

SPEC:

● F4(M4 Core) 108Mhz MCU with BLHELI32 firmware
● Maximum PWM output upto 96K (default 96K)
● The 4in1 has onboard analog current sensor, and TLM function (then no current reading over TLM)
● Uses metal case mosfet for better heat dissipation
● No output BEC
● Supports Lipo 4-6S
● Extra capacitor needed for 6s (1000uf 35v for 6s usage.)
● Dimensions:43 x 44mm
● Mounting holes:30.5×30.5mm(M4)
● Weight: 15.8g

Notice:

The air flow is very important if you want to run this 4in1 in high current.
The input cable (from Lipo to 4in1) should be at least 12AWG and well soldered.

Package included:

Tekko32 F4 Metal 4in1 65A ESC *1
M3 Anti-Vibration Silicone Grommet Insert *4
Electrolytic capacitor: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1

Downloads

• Manual

Some Tips: