iFlight Beast H7 V2 55A AIO (MPU6000) 25.5x25.5

Elevate your FPV experience with the iFlight Beast H7 V2 55A AIO (MPU6000) 25.5x25.5 flight controller. This all-in-one solution combines powerful features and high performance, making it the perfect choice for serious drone enthusiasts and racers alike.

The iFlight Beast H7 V2 is equipped with a robust 55A ESC, providing exceptional power handling capabilities for your high-performance builds. With its integrated MPU6000 gyro, you'll experience superior flight stability and responsiveness, ensuring you can execute complex maneuvers with ease.

Key Features:

• High Current Capacity: Supports up to 55A, ideal for powerful motors and demanding flight profiles.
• Integrated MPU6000 Gyro: Offers excellent stabilization for smooth flight and precise control.
• Compact Design: The 25.5x25.5mm form factor makes it perfect for various drone frames, saving space without sacrificing performance.
• Versatile Compatibility: Compatible with a wide range of FPV systems, enhancing your overall flight experience.

Upgrade to the iFlight Beast H7 V2 55A AIO for a reliable and high-performance flight controller that meets the needs of competitive pilots and FPV enthusiasts.

Top Features:

Vista digital system Plug-and-Play (VBat passthrough)

MCU: BGA-STM32H743 , 480MHz

OSD: AT7456E

Gyro: MPU6000

Blackbox: 16Mb Onboard Flash

BEC output: 5V 2.5A

Barometer: DPS310 (only works with Betaflight 4.3.0 and above)

Safety reminder:

The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). Make sure not to plug-in your DJI Air Unit directly when you're flying 6S, because this would fry it! BEC to add for your 6S build can be found here: https://shop.iflight-rc.com/index.php?route=product/product&product_id=747

Small motor 4S builds should usually need an additional capacitor of at least 16V/220uF, for 6S go up to 35V or even 50V. Bigger motors have a bigger current draw, higher voltage spikes and more serious back EMF (motor braking, works like a generator). Make sure to add big enough or even bigger low ESR capacitors on the AIO battery pad or on your battery lead the more aggressive motors you fly. There's a choice of capacitors in the package, but it's never a bad idea to make sure to protect your board. Smaller boards have less capacitance which has to be covered with external capacitors, there's no way around.

Our new DPS310 Barometer has more accuracy than the older BMP280 before but can not be activated in Betaflight below 4.3.0 which is currently in beta state (December 2020).

Main Changelog from V1 to V2:

- Circuit design optimized

- RPM-filtering can be used with JazzMaverick firmware (BLHeli-M), and JESC.

FC // Beast H7 AIO V2

Specification:

MCU: BGA-STM32H743

Gyro: MPU6000

Blackbox: 16Mb Onboard Flash

BEC output: 5V 2.5A 

Barometer: DPS310  (only works with Betaflight 4.3.0 and above)

Micro-USB

OSD: AT7456E

Uart:5 (UART1、UART2、UART3、UART4、UART7)

FC Firmware：IFLIGHT_H743_AIO 4.3.0

Mounting pattern: 25.5*25.5mm φ3mm

Dimensions: 32.5*32.5mm

Weight: 8.8g

ESC // 55A 2-6S

Specification:

Uarts: 5

Current Sensor: Yes

Input: 2-6S LIPO

Current scale: 100

Constant: 55A / Burst: 60A

BLHeli: BLHeli-S

Telemetry: no

ESC Firmware: G-H-30 BLS 16.7

Mounting pattern: 25.5*25.5mm/Φ3mm

Dimensions: 32.5*32.5mm

Package Includes:

- Beast H7 AIO V2 × 1

- Capacitor 470uF/16V x 1

- Capacitor 470uF/35V x 1

- XT60 12AWG cable 100mm x 1

- XT30U 18AWG cable 70mm x 1

- 14AWG Silicone Cable Red 100mm x 1

- 14AWG Silicone Cable Black 100mm x 1

-1.0-7P cable 50mm-28mm x 1

-1.0-7P cable 50mm x 1

- M2 silicon grommets x 4

- M2*12mm screws x 8

- M2 Transparent Nylon Nut x 8

- 0.8mm black Heat shrink tube 10mm x 8