iFlight BLITZ  F7 Pro Controller

The iFlight BLITZ F7 Pro Controller is engineered for the ultimate FPV flying experience. With advanced features and robust performance, this flight controller is perfect for both professional pilots and enthusiasts.

Key Features:

• High-Performance Processor: Equipped with an STM32F722 microcontroller, the BLITZ F7 Pro ensures rapid processing and precise control for a seamless flying experience.
• Multiple Protocol Support: Compatible with a variety of communication protocols, including PWM, PPM, and SBUS, making it versatile for different setups.
• Built-In OSD: The integrated On-Screen Display (OSD) allows you to view crucial flight data in real time, enhancing your flying experience.
• Robust ESC Connections: With support for multiple ESC connections, the BLITZ F7 Pro is designed for superior motor performance and responsiveness.

Elevate your FPV capabilities with the iFlight BLITZ F7 Pro Controller, where cutting-edge technology meets unmatched reliability.

PRODUCT DESCRIPTION

Top Features:

- Improved circuit design, better components, and lower electrical noise!

- DJI HD VTX Connector (Plug-and-Play / No soldering required)

- FC indicator LEDs for visual debugging

- 512MB BlackBox

- With LC filter

Specifications:

• Mount pattern: 35*35mm/ 4mm PCB hole diameter
• Smartaudio / IRC Tramp VTX protocol supported
• Firmware target: IFLIGHT_BLITZ_F7_PRO
• Input Voltage: 14.8V-34V (4S-8S LIPO)
• Motor outputs: 4x (SH1.25 connector)
• Flash: 512MB (Blackbox flash)
• I2C serial: SDA / SLA pads
• Dimensions: 41*41.5mm
• Barometer: DPS310
• OSD Chip: AT7456E
• LED controller: Yes
• MCU: STM32 F722
• Weight: 17g (±2)
• Beeper pad: Yes
• Gyro: MPU6000
• UARTS: 6

Wiring suggestion:

- UART1 for VTX HD/Analog

- UART2 for  Receiver

- UART4 for GPS

- UART5 for ESC Telemetry

- 8×Dshot/PWM outputs 

- 1×I2C  for GPS Mag

Tips

1. F722 MCU has an inner inverter.
2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2

Included Connectors (Plug-and-Play wire harness):

- 1xGH1.25 7pin connector for HD VTX/Analog VTX(RX2/GND/RX1/TX1/GND/+12V/Video out)

- 1xGH1.25 8pin connector for ESC1 (GND/VBAT/M1/M2/M3/M4/CUR/RX5)

- 1xGH1.25 8pin connector for ESC2 (GND/VBAT/M5/M6/M7/M8/CUR/RX5)

- 1xGH1.25 4pin connector for GPS&Mag(+5V/GND/TX4/RX4/SDA/SCL)

- 1xGH1.25 3pin connector for Analog camera (Video in/GND/+5V)

- 1xGH1.25 4pin connector for Any Receiver(GND/+5V/RX2/TX2)

- 1xGH1.25 4pin connector for LED&Beeper(LED/BZ-/+5V/GND)

What's in the package?

1 pc BLITZ F7 Pro Flight Controller

1 set of FC connectors (as above)

1 set silicone grommets