The NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S is the latest in our annual BeeBrain series, showcasing the 5th generation of our flagship flight controller. Every year, we raise the bar by introducing cutting-edge improvements, and the BLV5 is no exception. This powerful 75mm analog whoop pairs the advanced BeeBrain BLV5 flight controller with a robust hardware setup, including 0804 14000KV motors on a 2S power configuration, delivering incredible power and long flight times.
Even with a compact 450mAh 2S battery, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S achieves an impressive 4:30 minutes of freestyle flight and up to 6:30 minutes of hovering. With a TXCO UART-based ELRS diversity receiver for extended range and a 400mW VTX featuring smart power control, this whoop is designed to provide stable connectivity and performance, making it the perfect companion for outdoor adventures.
Built with the FPV community in mind, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S reflects our commitment to innovation and excellence. Whether you’re racing or practicing freestyle, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S offers the agility, range, and reliability you need to excel, making it the ultimate choice for pilots seeking a versatile and high-performing whoop.
Warning: All order will now ship with Caddx Ant nano 1200TVL Camera.
Intelligent Smart-Max Power Control: Smart-Max technology dynamically adjusts VTX power output based on real-time temperature monitoring to prevent overheating and protect your VTX hardware. It automatically reduces power when needed and boosts output to 400mW when temperatures allow, ensuring maximum signal strength and stable video transmission.
Flow 0804 14000KV Brushless Motor Longevity and enhanced power Great for 1S and 2S battery setups
Fly with Confidence:
Includes accessories to improve durability (prop guards) TCXO Crystal Oscillator ExpressLRS dual-antenna receiver delivers rock-solid signal transmission, making it perfect for any flight environment NewBeeDrone Cockroach75 frame with a lifetime warranty, designed to withstand the toughest conditions and provide long-lasting performance.
High-Performance Camera:
Caddx Ant Nano 1200TVL Camera with Goober Canopy V2, ⅓ inch sensor offering enhanced low-light performance and better protection Adjustable angle for different flying styles
Unleash Your Power:
Carbon Fiber Baseplate provides the most robust frame performance Sturdy design for freestyle flying or racing
Ready to Fly:
Professionally tuned PID settings for out-of-the-box performance, allowing you to fly confidently right from the start. No need for additional setup—just power up and take off!
Compact Size:
75mm frame size Weight: 36.4g (without battery) Fits standard 1S and 2S batteries
Enjoy longer flights with high-capacity battery
2S 550mAh:
Up to 6mins 30s Flight time Up to 7mins 30s Hovering Time
2S 650mAh:
Up to 7mins 30s Flight Time Up to 9mins Hovering Time
2S 850mAh:
Up to 9mins Flight Time Up to 11mins Hovering Time
The flight time was measured under ideal conditions and may vary depending on actual flying habits and environment
Power On the Receiver: Connect the receiver to a USB port or power it on three times. The blue indicator LED will start a double-blink pattern, signalling that it’s ready for binding. Ensure you are using firmware version 3.x to enable successful binding.
Prepare Your Remote Controller: Ensure that your remote controller is running ELRS 3.x firmware.
Start the Binding Process: Once the LED on the receiver begins double-blinking, proceed with the binding process on your remote controller.
Make sure both devices are running compatible firmware versions to ensure a smooth binding process.
If you mess up the setting?
Important Notice: If you experience issues with your drone, DO NOT flash the firmware. Simply perform a factory reset using the configuration tool (e.g., Betaflight Configurator) and then do an accelerometer calibration. For further assistance, please contact our support team at support@newbeedrone.com
My OSD keeps cutting out, and there is an oscillation in the right front arm, causing the quad to only go full throttle after I fall a small bit.
Poor range, and to make things worse, antenna broke off after 1 crash. Ordered 2 more. We'll see how those work out.
I'm probably going to order one more Acrobee, but I want to wait and see if the new antenna helps with the range issues.
C
Cristo
Un dron espectacular 10/10 va perfecto dentro y fuera de casa , muy contento con esta adquisición
D
Daniel Ebert
Sold mine
Bought one and it would not connect to betaflight. I was not able to flash the latest software, or even adjust my rates. After a few of my local buddies tried to configure it, but no luck. I sent it in to newbee to take a look.
I received my second one and I was able to flash the props off update and changed rates.
But this one disconnects randomly, and even will throw a “flyaway” on the screen and I have to invert it to stop it from climbing. I thought it was the radio. I purchased a new boxer, and the quad will not bind using a phrase, and when I try to add it in wifi, it fails. The wifi is only up for 30 seconds at a time. I tried 3 plug method, cli method, and wifi. The radio takes the bind phrase, but this unit will not.
I will either sell this, or I will eat the cost. As I only have four quads, but I have never had this much trouble.
C
Chase
Has some kinks
Fun to fly when it works right. Sometimes even relatively soft crashes for some reason changes the VTX channel. Also, have had multiple instances where it seems to desync and randomly 180 and nose-dive into the ground. Have also had intermittent issues with having to rebind on every power up, even after adding a binding phrase. I’ve got multiple other whoops and haven’t had these issues with any of them.
G
George Mourtzoukos
Quality and signal strength out of the box
Everything going well, with 850 mAh it feels pretty heavy and so drifty so pid need adjustments.
The camera gives so much saturation so you have to adjust the goggles when you switch to acrobee75 after an other whoop.
And last the propellers are going out so easily that after a fall it makes the turtle mode useless.
Im general like a build and flying os a so good experience!
![[Pre-order] TX16S MK3 MAX Radio Controller (ELRS / M2) RadioMaster](http://newbeedrone.com/cdn/shop/files/Pre-order_-TX16S-MK3-MAX-Radio-Controller-_ELRS-M2_-RadioMaster-157728874_{width}x.webp?v=1772727190)
