Throughout the whole journey, the GEPRC team keeps breaking through the boundary, innovating again in the field of long range FPV, and redefining the standard of long range, the high-performance long range FPV Crocodile75 V3 is officially released.
The appearance of the Crocodile75 V3 adopts a novel design, the overall structure is strengthened to effectively reduce the vibration of the fuselage and make the flight experience smoother and more stable. The Crocodile75 V3 is equipped with an O3 Air Unit with additional special cooling components for an effective cooling environment. The battery plug is integrated with the fuselage for convenient application. The power is upgraded with SPAN G50A BLHeli_32 4IN1 ESC and 2806.5 1350KV motor, sufficient power. In terms of flight energy consumption, save power and efficiency.
The overall performance of Crocodile75 V3 has been carefully and strictly tuned by the GEPRC team to bring the most passionate flying experience for pilots.
Feature
1. Adopt a novel appearance design, strengthen the fuselage structure, and reduce the impact of fuselage vibration on the gyroscope sampling data. 2. Equipped with SPEEDX2 2806.5 1350KV motor and HQ7.5×3.7×3 with sufficient power and high efficiency. 3. Upgrade the SPAN G50A BLHeli_32 4IN1. 4. Add protective side panels to effectively protect the electronic control system from instability caused by sand and dust pollution 5. The integrated design of the battery plug and the body simplifies the power-on operation, simplicity and beauty. 6. Equipped with O3 Air Unit and added special heatsink, excellent heat dissipation, to avoid O3 Air Unit overheating and stop recording. 7. The Crocodile75 V3 has a lengthier fuselage, can be mounted with Lipo 6S 3300mah-4500mah or Lion 6S 6000mah battery for flight. 8. Perfect match for 7-inch or 7.5-inch propellers
1 x Crocodile75 V3 Analog 4 x HQProp7.5×3.7×3 2 x M20*250mm battery strap 2 x Battery Silicone Pads 1 x Set of screws 1 x L-shaped screwdriver (1.5mm) 1 x L-shaped screwdriver (2mm) 1 x L-shaped screwdriver (3mm) 1 x M5 wrench 1 x Keychain 1 x GP Camera Base
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))