Happymodel ExpressLRS ES915TX 915MHz Ultra Long Range Transmitter Module for Radiomaster TX16S Jumper T12 T16 T18 Transmitter

OVERVIEW:

ES915TX module is a set of long-distance 915mhz wireless transmission equipment developed and designed based on the open source software ExpressLRS. This set of modules is characterized by ultra-long range, stable operation and low latency. The module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play. We have specially customized the heat sink for the transmitter module, which can help the transmitter module to operate stably under high power conditions.

The receiver module part is very small and exquisite, weighing only 0.70g without the antenna, which is very suitable for all kinds of Whoop fpv drone and Toothpick drone.

 

Specifications:

  • Brand Name: Happymodel

  • Item Name: ES915TX Module

  • Model: ES915RX/ES915TX/ES915TX&RX (Optional)


ES915RX:

  • VCC input: 3.7~24v  Recommend 5v~12v

  • Operation current: ~100Ma

  • Rx To FC protocol: CSRF

  • RF Frequency Range: 902MHz ~ 928MHz

  • Dimension: 16mm*10mm*3mm

  • Weight: 0.70 gram (exclude antenna)

  • Antenna connector:  IPEX4

  • Telemetry output Power: <17dBm


ES915TX:

  • Dimension: 55*39*13 MM (include heat sink)

  • Weight: 23gram (exclude antenna)

  • Antenna connector: SMA

  • VCC input: 5~13V, Recommend 5~9V

  • RF Frequency Range: 902MHz ~ 928MHz

  • Maximum Output Power: <33dBm(For >27dBm operation, we recommend add a fan for force cooling)


Compatibility: 

  • The radio transmitter need to compatible OpenTX

  • Compatible FrSky x7/x7 access/x9d plus/x9 lite/x9 lite s, Jumper T12/T16/T18, Radiomaster TX16S Transmitter


Bind procedure:

1. Supply power to the ES915RX, wait until the red and green LEDs on the ES915RX are off, immediately turn off the power, and then repeat again the above steps. When the ES915RX is powered on for the third time, the red LED light will start to flash quickly, which means that the ES915RX enters the binding mode

2. Insert the ES915TX module to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems, Enter into ELRS and press [Bind], the Red and Green LEDS on the ES915RX module will getting to be solid if bind successfully.


Package Include: 

  • 1 x ES915 TX module

  • 1 x TX antenna

  • 1 x RX antenna

  • 1 x Heat sink

  • 1 x Adapter wire

Note: A JR Module Case is not included. 3D print files are publicly available on Thingiverse.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)