NewBeeDrone BeeID M10Q GPS Module with RemoteID – Compliant, Compact, and Reliable

 

IMPORTANT: INAV USERS

Please turn off the AUTO-CONFIG setting inside INAV. This setting must be switched off in order for BeeID to function normally.

Stay compliant and elevate your drone’s performance with the NewBeeDrone BeeID M10Q GPS Module with RemoteID. Designed for drones over 250 grams, this high-performance module ensures that you meet FAA RemoteID requirements effortlessly. With a compact design that combines both GPS and RemoteID functionalities, the BeeID M10Q offers quick GPS lock, stable connectivity, and versatile compatibility—ideal for FPV pilots and professionals who demand reliability and ease of use.

The BeeID M10Q goes beyond basic compliance. Unlike typical RemoteID units, this module is equipped with a high-gain GPS antenna, providing faster, more accurate location tracking even in challenging flight conditions. Setup is simple with WiFi configuration via smartphone or computer, making it easy to register your FAA-compliant pilot ID and get in the air. Weighing just 10 grams, it integrates seamlessly into your drone’s design without adding bulk, letting you maintain both performance and compliance.

With full UART compatibility, the BeeID M10Q works seamlessly with popular flight controllers like Betaflight, iNAV, Ardupilot, and PX4, making it an adaptable and powerful addition to your drone setup. Perfect for any drone over 250g, this module combines the functions of a GPS and RemoteID unit, allowing you to fly confidently, stay connected, and meet regulatory standards.

 

Specifications:

  • Dimensions: 22mm x 15.6mm x 8mm
  • GPS Module: M10Q GPS for fast and precise location tracking
  • Protocol:GPS L1. GLONASS L1. GALILEO E1.
  • Weight:5.2g
  • Antenna: Ceramic GPS Antenna
  • Receiving Ch: 72ch
  • Bitrate: 115200bps
  • Speed Accuracy: 0.05m/s
  • Dynamic Characteristics: 50,000 meters
  • Operating Tempereture: -40°C - +85°C
  • RemoteID Compliance: Meets FAA requirements for drones over 250g; registration instructions available here
  • FAA UAS Declaration of Compliance here
  • Connectivity: WiFi for configuration; BLE for RemoteID broadcasting
  • Power: 5V input and ground connection
  • Compatibility: Standard GPS UART output; works with Betaflight, iNAV, Ardupilot, and PX4
  • Built-in Barometer: Provides altitude data for regions with altitude reporting requirements(The barometer does not participate in the flight, it is used solely for broadcast reports only.
  • Newest Firmware
  • BeeID 3D File 

 

Why Choose BeeID M10Q?

The BeeID M10Q is the ideal RemoteID solution for FPV pilots and drone enthusiasts. Its integrated GPS provides return-to-home functionality and ensures quick GPS lock, all in a lightweight, easy-to-install module. With enhanced reception and regulatory compliance, it’s the ultimate upgrade for any drone over 250 grams.

How to use:

BeeID M10Q GPS Module Setup Instructions

Step 1: Verify Flight Controller Compatibility

Before installation, ensure that your flight controller (FC) and its firmware support the UBLOX GPS protocol.

Some older versions of Betaflight firmware may not be compatible with UBLOX GPS.

It is recommended to update your FC to the latest firmware to ensure proper functionality.


Step 2: Wiring the BeeID M10Q GPS Module

Proper wiring is essential for accurate data transmission between the BeeID module and your flight controller. Follow these steps:

Connect the BeeID TX (Transmit) pin to the FC RX (Receive) pin on the same UART port.

Connect the BeeID RX (Receive) pin to the FC TX (Transmit) pin on the same UART port.

Ensure 5V power and ground are correctly connected to provide stable operation.


Step 3: Configuring the UART Port

After wiring, configure the corresponding UART port in your flight controller firmware:

Set the baud rate to 115200bps to match the module’s default speed.

Enable GPS mode on the selected UART port.

Save and reboot your flight controller to apply the changes.


Step 4: Confirm GPS Functionality

Verify that the module successfully acquires GPS satellites.

In Betaflight, iNAV, or Ardupilot, check the GPS status page for satellite lock and position updates.

Ensure that RemoteID broadcasting is active and functional via BLE. You can use Drone Scanner App to check the broadcasting information. 









Wire Diagram:

 

Customer Reviews

Based on 11 reviews
82%
(9)
9%
(1)
0%
(0)
0%
(0)
9%
(1)
P
Paul Nuwer

NewBeeDrone BeeID M10Q GPS Module with RemoteID

B
Bbeardedd FPV
Auto-config must be turned off in INAV 8

Update to previous review. The unit now works with INAV but it required turning off gps-auto-config in INAV CLI. Locks up satellites quickly. 4 stars because NBD still hasn't provided support a week later.

D
David

What a great little module! Easy setup, clearly thought out wiring, and great customer service! The included sticker sheets and blueberry candy were a nice touch.

J
Joshua Gibson

NewBeeDrone BeeID M10Q GPS Module with RemoteID

J
JBflys
The NEW standard! Love this BeeID

Works great and fits two things in one. Seamless integration and just needed to 3D print a way to carry it. Thanks…and I ordered 3 more!