The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference‚ which is a common problem on standard dipole stock antennas.
Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up in the air at the same time to help separate video bleed over by being on different polarization channels. Just make sure to use an RHCP/LHCP antenna on your BeeBrain and your Video Goggles at the same time to have the best signal separation as possible.
This antenna has a U.FL connector that is plug-n-play with the BeeBrain V2 and BeeBrain Lite making it a simple swap that requires no soldering.
Want a delight when form and function meet in the same place. It is a bit rare in the realm of fpv for drone parts to look like a work of art, but this clever little antenna increases range and clarity, and it looks good while doing too.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
