Thanks to GaN technology, the DJI 65W Portable Charger is smaller but offers increased charging speeds. With two USB-C and USB-A output ports, it can charge the Intelligent Flight Battery and RC at the same time. It supports PPS and PD protocols and can charge your smartphone, laptop, and other devices.
Highlights
Universal ports, lightweight and portable
Works with Mavic 3 Batteries & RC Pro
Can Be Used with Mobile Devices
1 x USB Type-A & 1 x USB Type-C Port
GaN Gallium Nitride Technology
Up to 65W of Recharging Power
Supports USB PD & PPS Fast Charging
Can Recharge 2 Devices Simultaneously
100-240V Dual-Volt Compatible
Save room in your gear bag without sacrificing charging power with this65W Portable GaN USB Charger for Mavic 3, Mavic 3 Cine, Avata, DJI Goggles 2 BatteryfromDJI. Utilizing GaN (Gallium Nitride) technology within the charger, DJI can keep the size of the charger small while still delivering up to 65W of power to either two Mavic 3 intelligent flight batteries, a flight battery and an RC
In The Box
DJI 65W Portable Charger × 1
Specifications
Input Voltage: 100-240 V, 2 A, 50/60 Hz
Output USB-C: 5 V/5 A, 9 V/5 A, 12 V/5 A, 15 V/4.3 A, 20 V/3.25 A, 5-20 V/3.25 A
USB-A: 5 V/2 A
Rated Power: 65 W
Operating Temperature Range: 5° to 40° C (41° to 104° F)
Charging Time*:
Intelligent Flight Battery: Approx. 1 hour and 36 mins
DJI RC Pro: Approx. 1 hour and 30 mins (USB-C port)
* It takes longer time to fully charge the Intelligent Flight Battery and RC or other devices simultaneously. * Tested in a lab environment and should be taken as reference only.
The overview has 12 volts, the speciation has 15 volts, the bag has 15 volts, and the cable actually puts out 12 volts. Get the description and labeling corrected. Otherwise, it works fine with wall wart or battery.
Flies nice enough but I guess I’m used to thrashing my tinyhawk3 at a playground. One pretty average bang while flying around under my piano broke the frame in 3 places. I was baffled at how it took so much damage. The warranty is still pretty expensive when you consider shipping. We’ll see how the replacement goes.
![[pre-order]Foxeer Reaper 82A F4 128K BL32 4in1 4-8S ESC](http://newbeedrone.com/cdn/shop/files/15-23-36-655714f8db47d.images.800x800_{width}x.jpg?v=1702012481)
![[pre-order]Flywoo O3 Air Unit Replacement Camera Module](http://newbeedrone.com/cdn/shop/files/O3-AIR-UNIT-Module-1_1800x_3580904b-6c25-4caf-94d6-bd0c201b46ef_{width}x.webp?v=1701919247)
![[pre-order]Flywoo O3 Camera TPU Protective Case](http://newbeedrone.com/cdn/shop/files/O3-TPU-3_1800x_4b6abcd1-f617-42bc-a9ae-2f0fbe8ceb0d_{width}x.webp?v=1701918762)
