Strap it in, and show your love with our very ownNewBeeDrone small straps!
These new smaller straps are perfect for your micro quad setups, coming in at a mere 203mm, and 16.9mm wide. The back of the strap has a rubber coating to prevent slippage and give it that extra grip.
A little thicker than most and feel durable. Rubberized grip works very well.
J
Josh
Pretty durable.
Got these as a freebie on one of my orders. Works well enough and I like the yellow
R
Robert Williams
Too thick
Unless you have a really tall build, the strap will barely fit between the electronics and the top plate. Now they just sit in the bottom of my tool box along with the super hard Fat Shark Foam. The only NewBee Product I can brag about is the neck strap.
d
david haley
great strap
perfect for my fpv cycle fouride with 4s pack
highly recommend
G
Gary Padilla
Perfect size battery strap for my 2.5 emax tiny hawk
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
