Too difficult to access the USB port on your compact 2-4" quad? Say goodbye!
It's time to say goodbye to this trouble! With this Bluetooth stack, you don't need to connect your quad to the PC for FC and even ESC tuning, everything can be done wirelessly in the SpeedyBee app.
Tune Flight controller and ESC wirelessly!
Power the quad, connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller.Also, every parameter of the BLHeli_S ESC in this stack can be set via the app.
Change motor directions wirelessly!
With this stack, when you finish your build, connect to the SpeedyBee app, change the motor directions just in a few simple steps. Then take off.
Support DJI Digital Video transmitter.
The flight controller has two independent 9V 2A BEC and 5V 2A BEC, supports various analog image transmissions above 5V, and also supports DJI Air Unit / RunCam Link / Vista.
Real 35A ESC, no false labeling!
6-layer 2oz PCB plus optimized circuit design equals stable and strong current output. The four-channel continuous 140A output can reach 30 seconds.
*Test result comes from SpeedyBee laboratory.
M2 or M3? Why not both?
Have you ever experienced that the stack holes of your frame did not fit the stack you got? This stack is perfectly compatible with M2/M3 screws. What’s more, two sets of M2 and M3 screws + silicone grommets are included in the package!
These batteries might actually be worth it in terms of dollars per flight time! They last over five minutes when my old lower end batteries last three minutes, and they’ve even lasted for seven on a freestyle quad in a tight environment. Plus it’s always fun to have a battery that can actually kind of handle full throttle for extended periods!
I tried to be cheap and find crappy clones of all these tools... it's not cheaper, it's very expensive to buy just a prop wrench, just a m3 nylock wrench and buying hex drivers and wire strippers. It totalled me 90$. This ethix toolkit was cheaper and got me exactly what I wanted and needed for my drone kit
Cool lil hummer. Been updated esc firmware. Flew well and fast fun Great indoor drone and race around the house. Great for raining days. Thanks newbeedrone for fast delivery and updates
![[pre-order] HDZero Freestyle V2 Kit](http://newbeedrone.com/cdn/shop/files/all_{width}x.png?v=1694509846)
![[pre-order] HDZero Freestyle V2 VTX](http://newbeedrone.com/cdn/shop/files/a_{width}x.png?v=1694509689)
![[pre-order] BETAFPV 2S Battery Charger and Voltage Tester BT3.0---9/30](http://newbeedrone.com/cdn/shop/files/BT3.0_720x_ba2e2544-fb0f-4599-a3ab-4c3e1209d0d4_{width}x.webp?v=1694154470)
