The GEP-CL35 V2 version was released after careful development by the GEPRC team.
GEP-CL35 V2 is developed and upgraded on the basis of CL35. It can be mounted with O3 VTX. The camera adopts the bottom-mounted shock absorption gimbal to solve the camera IMU’s resonance issue, and achieve a good anti-shaking effect. The main carbon plate and injection prop guards increased the 7075 aluminum column for structural strengthening.
Battery installation method using a strap with 7075 aluminum parts fixed. Power XT60E1-M plug and carbon plate are integrated and integrated for convenient application. The prop guard adds a storage card and USB port to the O3 Air Unit for easy data reading.
GEPRC strives for the ultimate flight experience!
Specification
Model: GEP-CL35 V2
Motor to Motor: 142mm
Top Plate: 2mm
Bottom Plate: 1.5mm
Arm Plate: 3.5mm
FC Mounting Hole: 25.5mm x 25.5mm
VTX Mouning Hole : 20mm x 20mm/25mm x 25mm
Motor Mounting Hole: 12mm x 12mm
Camera Installation Space: 20mm
Propeller Guard Internal Diameter: 95mm
Suitable Propeller Size: 3.5 inch propeller
Weight: 133.7g
Features
Prop guard for O3 Air Unit adds storage card and USB port for easy data reading.
Innovative camera shock-absorbing structure to fix the issue of lens IMU resonance and achieve the optimal anti-shake effect.
Battery installation method using a strap with 7075 aluminum parts fixed, solid and stable.
Power cable using XT60E1-M plug and carbon plate integrated design, user-friendly.
Injection molding prop guard is tough and impact-resistant, and the connection between the frame and the carbon plate is strengthened with aluminum columns.
Includes
Carbon Plate
1 X Main carbon plate 3.0mm
1 X Top Plate 2.0mm
1 X Bottom plate 1.5mm
Screw Kits
2 X Battery strap fixed aluminum parts
2 X 7075 mesh aluminum column M2*11.5*4
4 X 7075 mesh aluminum column M2*25*3.3
4 X Custom half crescent head screws M3*15
6 X Cup head screw M2*18
2 X Round head screws M2*16
4 X Round head screws with pad M2*4
4 X Round head screws M2*5.5
30 X Round head screws M2*7
14 X Round head screws M2*12
16 X Round head screws M2*8
6 X Round head screws M1.6*8
4 X Round head screws M2*6
6 X Round head screws M2.5*6
1 X Chamfered Hexagon Socket Screws M5x28
4 X Press Rivet Nuts M3
4 X self-tightening nuts M2
18 X Iron nuts M2
1 X Flange Nut M5
12 X Press Rivet Nut_Brass Color M2*1.9-OD4.9
3D Printed Parts
1 X Camera mount 2 holes
1 X Camera mount 4 holes
1 X Receiver mount
1 X T-shaped antenna mount
1 X VTX antenna mount
1 X Capacitor mount
1 X Power plug printed parts
1 X GP Camera base mount
Injection Molded Parts
1 X Injection molded prop guard
4 X Vibration dampening rubber for FC M2*6
6 X Camera vibration dampening rubber
4 X Camera gimbal shock absorbing rubber ring M3*10.5*10.25
Other Accessories
1 X Power XT60E1-M plug with cable
4 X Motor hub M7*15mm
3 X 5.8G VTX extension cable 80mm
7 X Heatshrink tube
1 X Naked GP Camera base mount( 1 X base mount, 2 X round head M2*12, 2 X press rivet nut M2)
Came with everything I needed to fix my problems as well as now I have some spare parts! Packaged Nicely. Could have had better diagrams and instructions but all in in it was great! Have been happy with GEPRC
Great pouch! Goggles 2 fit perfectly. Outside pocket holds one battery and cable. I feel comfortable leaving the eye lens cover off and just putting goggles in bag when not in use.
It is unfortunate that this is basically the only super lightweight RID module, because I have heard a lot of issues with them just straight up not working. Essentially a worthless product. Does not obtain any satellites. I have contacted DroneTag support and they tried troubleshooting a little and then recommended I pay to ship the product all the way back to the Czech Republic… I contacted NewBeeDrone support for a return and they have not responded in 2 business days. I am hoping I will be able to return this or swap it for another unit (if its just a faulty one).