DroneAnt-Plus-I™ Industrial-Grade Ultra-High Gain Drone Range Extender Octa-Element Omnidirectional/Directional Antenna Set
The DroneAnt-Plus-I™ by WirEng® is the ultimate ultra-high gain, directional/omnidirectional antenna dedicated to any drone, for drastically increased range, reliability, operational stability, and invulnerability from external interferences.
The DroneAnt-Plus-I™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your drone, r simply when your drone's operating range is not enough to satisfy your needs.
The DroneAnt-Plus-I™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the DroneAnt-Plus-I™ by WirEng® is to drastically increase your drone's reach, however, the DroneAnt-Plus-I™ is also recommended to stabilize your droneoperation because it will provide your dronewith a very strong and reliable signal at any altitude, inclination, and operating distance.
The DroneAnt-Plus-I™ by WirEng® can be assembled as omni-directional (i.e., four antenna pairs 90 degrees apart from each other), bi-directional (two arbitrary directions as per your needs, with two pairs for each direction), or fully directional (all four pairs in one direction). This flexibility makes the DroneAnt-Plus™ a great investment to assure your drone's increased distance and operational reliability at all times.
The DroneAnt-Plus-I™ by WirEng® is truly compatible with any drone and controller, because it supports all of drones frequencies and modes of operation, including polarization, bandwidth, and concurrent multi-frequency transceiver bidirectionally. For any questions or concerns, please contact us here for assistance.
The DroneAnt-Plus-I™ by WirEng® comes with WirEng® extended 2-year warranty. Utility and Design Patents pending.
Main Features
The DroneAnt-Plus-I™ replaces the two small controllerantennas with eight powerful WirEng® antennas, orientable for omnidirectional, semi-directional, and fully directional radiation patterns, without the need of any controller modification, so the manufacturer warranty will still be valid.
Provided cables (if chosen) will connect directly to the drone's controller controller (via a short strain-relief adapter).
The DroneAnt-Plus-I™ will increases the controller reach, obtaining longer distances and increased stability and reliability for controlling your drone.
All drone controllers and drones bands are supported by careful verification with all major drones manufacturers' technical specifications.
The DroneAnt-Plus-I™ will also enhance your drone's operational reliability and stability.
The DroneAnt-Plus-I™ will also possibly save battery power because the drone on-board transceiver won't have to boost its transmission power to its maximum to reach the drone, thanks for the signal gain that the DroneAnt-Plus™ provides.
Each of the eight DroneAnt-Plus-I™ antennas have stainless steel back shield and stainless steel hardware, and each of the four holding arms are made of marine grade stainless steel.
Each DroneAnt-Plus-I™ element is made of FRP and categorized as industrial grade
Each DroneAnt-Plus-I™ element has a 24K gold plated N-Connector on its radome, for added reliability and maximum power transfer.
The DroneAnt-Plus-I™ has an extended operating temperature of -45° to +155° C, for use in virtually any possible environment and weather condition.
The DroneAnt-Plus-I™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than one hundred times what's usually needed).
The DroneAnt-Plus-I™ is strong and durable, and it's intended for use even in difficult situations and environments.
The DroneAnt-Plus-I™ has an IP67 rating (protected against dust, strong water jets, and water waves).
The DroneAnt-Plus-I™ has a UL94 V-0 flammability rating
The DroneAnt-Plus-I™ has USA and International trademarks current, and utilities and design patents pending.
You can buy from us with confidence, the DroneAnt-Plus-I™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty, and we're a WirEng® officially authorized distributor.
For tiny whoops weight is everything. The 75 Air frame is one option to create a light weight 75mm frame. I am enjoying mine. I migrated the motors from a Meteor65 Pro quad and use a set of 40mm propellers. Using 550 mah battery I can get a good long flight time finally.
Bought these to build a 7in 8S quad. The low kv is perfect for keeping the tip speed under Mach. These appear to be rebranded Emax EcoII, so decent quality. This quad is so powerful on 8S it's just silly. Happy Camper!