You've never seen a frame like this - Designed to be stable, cinematic and easy to tune, this frame can do it all.
Do you want a butter smooth 5 inch freestyle quad? Use the 5 inch arms in X configuration
How about a cinematic 5 inch with no props in view with low camera tilt?Flip the arms over and get a deadcat 5 configuration!
Maybe you want a 7 inch long-range efficiency monster? Use the 7 inch arms in quasi-X configuration to squeeze every second out of your flight time
What about a full-on cinematic 7 inch without props in view with low camera tilt? Flip the 7 inch arms over and it turn it into a deadcat 7!
Or maybe you want an 8 inch long-distance efficiency monster? Those 7-inch arms will also fit 8 inch props in quasi-X configuration.
TheCamera Butter Cinema ONEframe is the result of countless prototypes and revisions to get everything exactly the way it needs to be:
Super solid due to the unique reinforcing piece that keeps all of the arms stable and locked in place.
Split bottom plate keeps everything tight and reduces vibrations.
Strength where it needs it, but still light @ 109g with the 5 inch arms. 136g with 7/8 inch arms.
Arms can be swapped out (or flipped over to change configuration!) with just 2 screws
Arm screws are NOT used for the stack, keeping vibrations down to a minimum
Slammed design to keep in compact and strong, or you can use longer standoffs for more open builds
Lots of places for your components: 20x20 and 30x30 mount in the middle, 20x20 mount in the rear (fits a caddx Vista perfectly), and a second 20x20 mount in the front can be used if your camera is moved forward.
Because the tolerances in the parts are very tight, this frame can be tricky to assemble the first time you put it together. although after the first time it's much easier to disassemble/reassemble.
Made in Canada with high quality carbon.
Includes:
All 3 plates, center brace
5" or 7/8" arms (or both) depending on configuration
Battery pad
2 (short and long) TPU FPV camera mounts
2 TPU SMA mounts
Hardware package (includes 30x30 and 20x20 stack screws and Caddx Vista or rear stack screws)
Camera Butter super-grip battery strap
Camera Butter sticker
Overview and build how-to:
Made using Camera Butter HALO motors and Cinema ONE frame:
Darren excelled in selecting the development kit and essential accessories that would have to purchase separately, ensuring I made an informed purchase. His attention to detail and dedication prevented any post-purchase disappointment. I am thoroughly pleased and grateful for his exceptional service.
An absolute pleasure to fly. Handles incredibly well and responds to any input just as I expected.
The only criticism is not of the performance of the drone. Unfortunately, it arrived with damage to the canopy. But I was still able to fly it and make initial observations.
Update process is cumbersome, better if done with the VTX out of the quad. Also the update port is much flimsier than the earlier 2 antenna versions, IMO.
