CUAV V5+ Core

Product description

 

V5+® is an advanced autopilot designed by CUAV® and the PX4 team and manufactured by CUAV. It is based on the Pixhawk FMUv5 design standard and is perfectly compatible with PX4 and ArduPilot firmware.

Faster F765 processor

V5+ selects the STM32F765 processor with better performance. Its main frequency is up to 216MHZ and it contains 2MB FLASH/512K RAM. The clock speed is higher, the RAM is larger, and the speed will be greatly improved.

New FMUv5 hardware design

V5+ is a high-performance flight control system created by CUAV based on FMUv5 open source hardware. It has a more advanced processor than FMUv3, a larger FLASH and RAM, and a more stable and reliable sensor.

Support RTK centimeter positioning

V5+ supports RTK positioning module to achieve accurate centimeter positioning to meet your higher positioning requirements. (RTK positioning module needs to be purchased separately)


PX4 official standard

CUAV is a premium member of Dronecode and has been working to promote the PX4 open source project. The V5+ interface is designed according to the official PX4 standard to ensure compatibility and interoperability with hardware and software products in the PX4 ecosystem.

Multi-sensor redundancy combination

Built-in 5 sets of sensors, the flight controller monitors the multi-channel sensor data in real time, and performs redundant switching immediately after the failure, improving flight safety and stability.

Specifications /V5+ flight controller

Hardware parameter
Main processor STM32F765 (32 Bit Arm® Cortex®-M7, 216MHz, 2MB flash, 512KB RAM)
Coprocessor STM32F100 (32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM)
sensor
Accelerometer ICM-20602/ICM-20689/BMI055
Gyro ICM-20602/ICM-20689/BMI055
Electronic compass IST8310
Barometer MS5611
External interface
UART serial port 5
I2C 4
SPI 1
CAN 2
ADC 2
PWM output 8-14 PWM outputs (6 from IO, 8 from FMU)
DSM/SBUS/RSSI 1
PPM IN 1
CAN buses 2
Analog inputs for voltage/current 2
GPS&Safety 1
Debug/F7 SWD interface 1
USB interface 1(Type-C)
TF slot 1
Related interface protocol
PPM IN PPM
DSM/SBUS DSM/SBUS;RSSI:PWM/3.3v analog voltage
GPS NMEA/UBLOX
Support model
PX4 and Ardupilot firmware Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc.
Working environment and physical parameters
Operating Voltage 4.5 ~ 5.5 V
USB Input voltage 5V +- 0.25v
Servo input voltage 0-36v
Operating temperature -20 ~ 85°c
size&weight
Size 85.5*42*33mm
Weight 91g

Material download /V5+flight controller


Weight 1 kg
Dimensions 20 × 10 × 5 cm

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)