Effortless way to let your drone fly safe & compliant in EU and US regions. Direct / Broadcast Remote Identification device compatible with any drone.
Direct / Broadcast Remote Identification
New regulations are forcing professional pilots in EU & US regions to make their drones digitally visible. We created Beacon, the add-on that makes drones instantly compliant with the latest DRI standards. Upgrade your existing drone, without the need to purchase new aircraft.
Slap the Dronetag Beacon on and instantly enhance your drone with DRI capability. The tiny device transmits the drone location via Bluetooth to up to a 3 km (1.86 miles) range.
Supported regions
European Union
ASD-STAN
Compliant with prEN 4709-002 which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific category.
USA
ASTM
Dronetag Beacon is Approved by FAA (check the DoC here) and Compliant with ASTM F3411 which requires Broadcast Remote ID for all pilots flying out of FAA-recognized identification areas.
Other countries
As Beacon is transmitting data via Bluetooth, it is usable anywhere in the world. All countries using ASD-STAN or ASTM standards are supported. Check your local rules.
Flying in the EU or US region and need advanced Network Remote Identification?
Dronetag Beacon is the bare minimum to fly your drone safe & compliant.
With the size of 2 chocolate bar squares (16 g / 0.56 oz) Beacon swing opens the door to the digital experience for drones of all sizes.
Everywhere, Everytime, Ever
Fit the Beacon to nanoweight drone or large UAV. Unparalleled up to 16 hours of battery life gives you enough time to accomplish the wildest missions. Reclosable dual lock fastener so strong that you can lift an average drone by it. Worldwide supported Bluetooth technology and the finest geolocation standards.
“Entry-level for everyone who wants to experience the digital world of drone flying.”
Jaroslav Řešátko, owner of DJI Telink (CZ)
Dronetag App
Available on all devices
Manage your devices, check the airspace zones, plan your flights, inspect airborne drones around with their flight itineraries and notify other pilots about any airspace hazards. All that in one app – the Dronetag App.
Show your drone on flight radar
Slap on this tiny beauty and let your drone fly safe & compliant.
The sturdy 3D printed box packed with technology instantly enhances any drone with a DRI feature.
Features
All Data Snug and Secured
With over-the-air firmware updates and data encryption, your information will be safe and neatly organized in the mobile app.
Multiple geolocation standards
Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning.
Instant Direct Remote ID upgrade
Compliant with Direct / Broadcast Remote ID according to the prEN 4709-002 and ASTM F3411 standards.
Internal Bluetooth & GNSS antennas
With an option to add external Bluetooth antennas for better signal reception.
Unparalleled up to 16 hours of battery life
Or use your drone as the power source for carefree flying without hustling to charge several devices.
Worry-free flight from take-off to landing
Beacon warns other closed-by pilots about potential dangers during take-off, landing, or when free-fall is detected.
Precise sensors onboard
GNSS position estimation, pressure altitude measurement, and motion detection via accelerometer.
MAVlink & DJI A3 support
Professional DJI and Pixhawk flight controllers integration via our EXT port to connect to drone’s flight data.
Specifications
Short-range radioBluetooth 2.4GHz
SensorsGNSS, barometer, accelerometer
PositioningGPS L1, GLONASS L1, Galileo E1, SBAS
Built-in AntennasBluetooth and GNSS
Optional AntennasBluetooth via MMCX plugs
External ports3.3V extension connector and 5V Micro USB
BatteryLiPo 3.7V 200 mAh
Battery life8-16 hours (depending on the configuration)
Charging5V Micro USB
Charging time2 hours from a discharged state
Average current consumption15mA
Maximum current consumption100mA
Enclosureplastic
Fastening mechanism3M Dual-lock SJ4570
IP ratingIP43
Operating temperature-20 °C to +60 °C (-4 °F to 140 °F)
An excellent upgrade for the goggles X. Much more comfortable vs. any foam I've used to date, including the stock foam which does not fit my narrow face.
