The SPEEDX2 1303.5 motor is an innovative brushless motor with a lightweight design, unique appearance and good heat dissipation.
With a lightweight structure, only 6.5g (90mm cable length).The outer rotor uses a blade design, which is exquisite and magnificent. The raised propeller platform has greater compatibility with the inverted mounted propeller models, and avoids the contact between the large-pitch propeller and the top of the rotor to cause the propeller to be unbalanced. A large area is hollowed out to reduce weight, so as to obtain good heat dissipation and efficiency, and effectively control the working temperature of the motor.
SPEEDX2 1303.5 motor is made of high quality 7075-T aircraft aluminum material, which brings better strength to the rotor. Good magnetic circuit design, with stable linearity and efficient explosive power, brings pilots a super smooth flying experience. Perfect for pilots to build their own 2″ cinewhoop FPV drones.
GEPRC is committed to providing pilots with brushless motors that are lighter in weight, faster in response, higher in efficiency and stronger in power.
Specification
Model: SPEEDX2 1303.5-5500KV
Configuration：9N12P
Magnet: N52H ARC
Stator diameter: 13mm
Stator height: 3.5mm
Shaft diameter: Φ2mm(in)1.5mm(out)
Dimension: Φ17.35mm*11.7mm
Lead wires: 28#AWG 90mm
Rated voltage (LiPo): 2-4S
Maximum power: 128.8W
Maximum current: 8.7A
Recommended ESC: 35A
Mounting hole: 9mmx9mm(M2)
Color: titanium color
Weight: 6.5g (90MM wire length)
Suitable models: 2 inch with propeller guard drones or 2.5 inch freestyle drones
Model: SPEEDX2 1303.5-3800KV
Configuration: 9N12P
Magnet: N52H ARC
Stator diameter: 13mm
Stator height: 3.5mm
Shaft diameter: Φ2mm(in)1.5mm(out)
Dimension: Φ17.35mm*11.7mm
Lead wires: 28#AWG 90mm
Rated voltage (LiPo): 4-6S
Maximum power: 139.9W
Maximunm current: 6.3A
Recommended ESC: 35A
Mounting hole: 9mmx9mm(M2)
Color: titanium color
Weight: 6.5g (90MM wire length)
Suitable models: 2 inch with propeller guard drones or 2.5 inch freestyle drones
Feature
1. 7075 aircraft aluminum one-piece high-strength housing makes the motor more durable and crash-resistant.
2. The small size and lightweight design makes the flight feel lighter. The weight with the cable is only 6.5g (90MM cable length), suitable for building a 2-inch drone with propeller guard.
3. Rotor’s large hollow design has a large air intake, and strong temperature control so that the motor runs more stable.
4. N52H strong magnet, with low internal loss stator, the efficiency is significantly improved, making the endurance more durable.
5. The 1.5mm shaft is generally suitable for conventional 2-2.5 inch propellers on the market.
Includes
1 x SPEEDX2 1303.5 motor 6 x M2*6mm screws 6 x M2*8mm screws
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
