Hoodman Green LED Light Kit for Hoodman 3-5 Foot Drone Landing Pads
HIGHLIGHTS
Clearly mark the position of your drone landing pad at night
Easily illuminate your night drone ground operations for safety
Low-level LED green lights improve vision detail at night
FAA heliport lights are green to protect night vision pupil dilation
For use with Hoodman 3-5 foot drone landing pads
2 AA batteries yield over 50 hours of light
3 settings- continuous on, flashing and quick flashing
Hoodman Launch Pad Light Kits are an easy way to illuminate your home base. Low-level LED green lights improve vision detail and clarity without shutting down your night vision pupil dilation. FAA Heliport lights are green for the same reason. The battery-operated LED light kit will operate for over 50 hours on 2 AA batteries. Set up by affixing the power pack to the Velcro patch sewn into the West compass mark of your Hoodman Orange Drone Launch Pad. Next, string the light cord through the loops sewn at the perimeter of the Launch Pad. Light Kits have 3 settings: Continuous On, Flashing and Quick Flashing.
Dimensions
Power Pack: 3.5 inches X 1.3 inches X 0.75 inch LED length = 15.5 feet
Details
Hoodman Launch Pad Light Kits are an easy way to illuminate your home base. Low-level LED green lights improve vision detail and clarity without shutting down your night vision pupil dilation. FAA Heliport lights are green for the same reason. The battery-operated LED light kit will operate for over 50 hours on 2 AA batteries. Set up by affixing the power pack to the Velcro patch sewn into the West compass mark of your Hoodman Orange Drone Launch Pad. Next, string the light cord through the loops sewn at the perimeter of the Launch Pad. Light Kits have 3 settings: Continuous On, Flashing and Quick Flashing.
Warranty
1 Year Warranty Free of manufacturer defects Support@Hoodmanusa.com 310.222.8608
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
