The Landing Pad XL is a large 750mm in diameter folding landing pad made from the same durable material as our micro race gates. When folded, the storage bag measures 30cm in diameter.
Designed for outdoor use, this pad will keep dust and debris away from your drone upon takeoff and landing. Alternatively, you can place your backpack and other equipment on top of the pad to keep them clean.
Included in the package are three tent stakes to hold down the pad when using it for drone takeoffs and landings.
Haven’t had a chance to use it but got it on sale and it seems like it will work great. Small and compact when folded but decent size when open. Should come in very handy especially for landing in dirt to avoid dirt in the motors.
F
Frenchman
Bigger the better
Cool looking landing pad it is much bigger than others. Quality looks good and can’t miss the spot! ;-)
J
James R
Bright
Large pad and it is easy to spot from the air.
k
kenny blue
Landing pad
Love this thing.alot better than the plywood I was carrying around
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
