Thicc 2.1 is a 390mm 7 or 8" X8 Cinelifter.Arms are 8mm carbon, main body plates are 2.5mm, bottom plate is 3mm. With 2 spots for 30x30 fc stacks, standoff height is 20mm. Feel free to request 25 or 30mm standoffs instead.
Thicc 2.1 has an identical layout as 2.0 and is totally cross compatible. The differences are a slightly different top plate to accommodate six dampers, and a universal cam mount.
The Thicc universal cam mount is affixed with six dampers, either Alpha Gel or Silicone. The camera is attached with two 1/4-20 screws. It is compatible with Thicc 2.0. If you have a 2.0 you can just order the cam mount, dampers and spacers are included.
The FX6 mod converts the left vertical stanchion
A complete kit includes the base frame, cam mount, and 3d printed parts. You can print your own partshere. Make sure to use the downwards antenna mount.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
