Find the location for the cutout on the Tango 2 back shell (on the inside, near the power button)
Use a dremel, knife or solder tip to cut a small hole according to the outline
Ensure fit of the flex PCB
Clean the back surface and tape the Tango 2 module bay down
Slide the flex PCB in and place it into the receptacle
Fit the flex PCB into the PCB inside the module bay and place it into the receptacle
Close the module bay, and you're done!
Warning: Batch 1 of Tango 2 shipped without module bay capability. Please verify that there is a connector before purchasing this add-on. Upgrade PCB's are available!
Also, whenever opening up your Tango 2 in future, you will need to open the module bay and release the flex PCB from the socket.
Specifications
"LITE" style module bay add-on for Tango 2
Compatible with TBS Tango 2 main board "V007A" and up
Easy install for multiprotocal unit. Must have upgrade.
A
Aadric Allan
amazing
super cool to use this on the tango 2
J
JoeE
functional, but not 100 ideal, so 4 stars.
Easy to install with a hex driver and soldering iron / dremel (need to burn/cut a small hole in the back of the case).
Wish it were permanently mounted with screws or the controller included the module bay out of the box, but hopefully the 3M mounting tape holds up over time.
Also wish there was a removable cover to protect the pins and give a smooth back, if I don't want to keep the TBS MPM attached all the time.
N
Nature Photography
Great
Works great with the tango 2
J
Jason Hall
Great product, but pins are fragile.
I love having this option for my Tango 2. The problem is that I am buying this to replace another one, because one of the pins broke from normal use. Wish the pins were more sturdy, or they would at least sell the pin/ribbon cable separately. Other then the fragile pins, it's a great product!
Update process is cumbersome, better if done with the VTX out of the quad. Also the update port is much flimsier than the earlier 2 antenna versions, IMO.
I use this mont for all my builds with a DJI O3 system. It comes with all the hardware nessassery and I like how is provides a small gap between the frame and the air unit so you can run wires under it. With all that said, it is still very low profile to fit on builds that use short 20mm standoffs too.
This thing is really fun and I haven't had to touch the PIDs at all. Super maneuverable on high rates and really mellow on low rates. I'm teaching my six year old grandson how to fly and he's doing great with it then raise the rates and I doing freestyle in my livingroom. Top off the performance with Newbeedrones awesome customer service and you can't lose. Newbeedrone is now my go to site for whoop stuff.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
