The GEPRC MK5D-LR7 HD O3 Long Range FPV drone is the ultimate choice for those seeking unmatched performance and extended flight capabilities. Engineered for long-range exploration, this drone features the innovative HD O3 camera system, delivering stunning 1080p video quality with minimal latency. With its robust build and optimized design, the MK5D-LR7 ensures a stable flight experience, allowing you to capture breathtaking aerial footage like never before.
The MK5D-LR7 is equipped with powerful long-range transmission capabilities, enabling you to soar to new heights without losing connection. Its user-friendly setup and intuitive controls make it ideal for both novice and experienced pilots. Experience the thrill of long-distance flying with the GEPRC MK5D-LR7 HD O3 Long Range FPV.
Why Choose the GEPRC MK5D-LR7 HD O3 Long Range FPV?
The GEPRC MK5D-LR7 combines advanced technology with exceptional durability, making it perfect for outdoor enthusiasts and aerial photographers. Its high-definition camera captures stunning visuals, while the long-range capabilities allow for adventurous exploration. Take your FPV flying to the next level with the GEPRC MK5D-LR7.
Key Features:
HD O3 Camera System for high-quality video capture
Long Range Transmission for extended flight capabilities
Stable Flight Performance with a robust design
Ideal for Aerial Photography and adventurous exploration
User-Friendly Setup for easy operation
Summary
MK5D-LR7 is a 7-inch model upgraded on the basis of the MARK5 model. For the mainstream video transmission system in the market, it releases four versions: O3 Air Unit, vista, walksnail, and analog version.
The strength of the arm structure is optimized, without losing the original design style, while the strength is higher, and the flight fault tolerance rate is improved. Equipped with GEPRC new small-sized M8U GPS, it provides a strong guarantee for your Long Range flight. MK5D-LR7 uses GEPRC SPAN F722-BT-HD V2 stack. The flight controller is equipped with ICM 42688P gyroscope, which has smooth flight, redundant performance and ports, and supports Bluetooth wireless connection for parameter adjustment. GEP-2806.5 motor, with HQ Prop 7X4X3 propeller, strong power output. When flying with DC structure, no propeller in view, which is suitable for O3 on board recording.
MK5D-LR7 is shipped with two different camera mounting bases, which can be installed with a full range of GoPro action cameras, as well as Naked GoPro 8 10, Insta 360 GO2 and Caddx Peanut, etc., to record beautiful moments for your flight.
This time MK5D-LR7 will take you to see the law of all things and travel between mountains and rivers.
Features
Upgraded lens aluminum alloy side plate, durable and more visual impact.
Built-in Bluetooth, support mobile phone wireless connection for parameter tuning.
The strength of the arm is upgraded, without losing the original style and at the same time, the strength is higher.
The HD version uses DJI new O3 VTX, clear image, stable signal, low-latency, long-distance, and supports up to 4K/120fps recording.
Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment.
Independent capacitor and buzzer compartment, the operating environment of the whole machine is extremely stable, no shaking, no jitter.
Design two kinds of mouting bases, which can be installed with a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear.
With GEP-VTC6-6000mAh battery, the flight time is 30 minutes, and with GoPro 10, the flight time is 20 minutes.
This is a good Drone only for people who understand how to solder and set up different components on FPV drones already. In my experience, I ran through beta flight and everything looked normal. I adjusted settings and modes. No problem.
One thing I noticed is that the receiver, nor the GPS were powered on via USB. 1.) It’s Good to get the GPS hot before you takeoff to acquire satellites via USB. This does not have that capability until re-soldering. 2.) You cannot bind via USB and your radio. Lastly, whenever I Went to bind the receiver and update the RX, The receiver shut off mid process, until I flicked at it and then pressed the blind button a couple of times to re-enter bind mode. After re-powered on everything set up normally.
I set everything up and then went to fly (the next morning). At first, I flew a couple of laps pretty close to myself. Within 500 feet of range. Then I took it over 1000, then 1500 about four batteries in, I mentioned the last battery. I went to takeoff and at about 1000 feet or a little more away. I FAILSAFED and dropped her right out of the sky. (((( Because I’m a d and did not have return to set up.))) It took me like 10 minutes to find this drone because I was Flying along visible landmarks, and based on reviewing flight footage could use longitude latitude, and also visual markers to find the drone. I knew I could not trust Drone after what happened to me setting it up.
After that incident, everything was fine until the next afternoon I went to plug the battery in and takeoff and noticed that nothing was happening on my radio. The receiver had no power again! (Excited;happy exclamation) I felt happy because I figured out that there is an internal problem with the receiver and not something that is wrong with the flight controller or some weird issues. I unplugged and replug the battery and it worked.
So after I popped off the top plate again, I changed the beeper, I had already moved crossfire to the front of the quad copter. And then whenever I popped out the 03 air unit to look at it (((BECAUSE IT WAS FLICKERING Upon landing and would not display post flights statistics)
When I lifted up the air unit and looked at the way, the cable was wrapped… It was wrapped around the positive lead. And the positive side capacitor wire beyond the nice electrical tape had a slit in it conveniently. You can say that was accidentally cut when they were trying to strip the wire. I feel like they didn’t want you to have this quad for very long based upon the way I saw things set up. There were loose arms on this quad and motors. You have to check this thing over when you get it. You cannot just set it up and fly away with it, you will definitely lose it. And I’m sure that’s what the manufacturer intended as well. They were meant for one flight missions.
Now I’m sorry to post a review like this. But I’ve never gotten a bind and fly That’s set up up and rigged with “booby traps like this.” I’m still going to recommend this quad if you have experience, and understand what you’re doing. Because it is a beautiful bird and she does deserve to be flown gracefully, elegantly, With style and charisma in the mountains or long range. This Drone deserves a good life and deserves to fly a long life.
If you’ve been looking at it, get it!!!
And NEWBEE DRONE Has awesome customer service, they are super responsive, can answer any questions and help you troubleshoot. I would highly recommend getting any of your stuff from NEWBEE Drone. You can trust them!!!
J
Jerry Zhang
Incredibly well tuned and built
I have no clue why no one talks about this quad it's incredible, it flies extremely smooth/controlled and is clearly well built. The way the DJI O3 antennas attach is pretty tight though not sure if this was a design feature but it seems to work.
I can't speak on the actual long range ability because I bought it to put a larger camera on it and don't have an upgraded ELRS transmitter but I have great signal far out.
