NewBeeDrone SavageBee HD O3 Ultra-Light weight kit - ELRS2.4

Introducing the SavageBee HD O3 – The Pinnacle of Toothpick-Sized Drone Innovation

Elevate your aerial footage with the SavageBee HD O3 Mini Drone, a marvel of engineering that packs the power of a full-sized drone into a nimble 2.5-inch tri-blade propeller framework. Weighing in at a mere 84 grams sans battery, this drone redefines portability without compromising on the quality of your flight experience.

Fly Free, Fly Far Enjoy approximately 3:30 minutes of flight time with a 550mah 2S battery, and extend your explorations to about 5 minutes with a 720mah 2S battery. Opt for the Naked DJI O3 option and witness the scale tilt to an incredible 68 grams, with flight times soaring to 4:30 minutes with a 550mah 2S battery.

Quiet Might Do not let the size deceive you – the SavageBee HD O3 buzzes through the air with a force that rivals 5-inch drones, ensuring a super quiet yet powerful performance. Designed to be discreet, its propellers stay out of your shots, ensuring unobstructed, cinematic quality footage.

Cinematic Mastery in a Snap As the smallest outdoor freestyle cinematic 2.5-inch drone, the SavageBee HD O3 comes equipped with the DJI O3 system, capable of capturing 4k 60fps video complete with rocksteady stabilization. Ready to share content? Directly output your footage, fully primed for editing and social media posting.

Travel-Ready Companion Compact and less demanding in space than its 3-inch or 5-inch counterparts, this drone is your ideal travel buddy. Never miss an opportunity to capture the wonders of your adventures.

Precision Control for Unmatched Stability At the heart of the SavageBee HD O3 lies the NewBeeDrone BeeBrain BL HD G4 Flight Controller, featuring the cutting-edge STM32G474 MCU alongside the reliable MPU6000 Gyro. With double N-MOS rated at 20A for 1-2 power and a built-in NewBeeDrone ELRS2.4G Diversity receiver, your flights are smoother, more stable, and incredibly responsive.

Prepare for takeoff with the SavageBee HD O3 Mini Drone – where size meets power, and creativity knows no bounds.

BeeBrain HD G4 Flight controller Specifications:

  • MCU: STM32G474
  • ESC Firmware: Z-H-40 - Bluejay 0.19.2 48kHz.
  • ESC Specifications: 1 channel 20A ESC
  • Receiver: NBD ExpressLRS 3.0 Diversity (non-SPl)
  • Receiver Antenna: 1x BeeT-Antenna 1x 2.4G receiver antenna
  • Flight Controller Weight:7.4g (including antenna and XT30 Battery connector)
  • Flight Controller Size: Outer dimensions :29 x 29 x 7.6 mm
  • Flight Controller Holes: 25.5 x 25.5 mm
  • Battery Input: 1-2S
  • BEC:10V 2A for DJI O3 (under 2S power only)
  • BEC:5V 2A
  • UART1: Free
  • UART2: TX & RX for EXPRESSLRS 3.0 receiver
  • UART3: Free
  • UART4: Free

Drone Specification:

Includes:

1x SavageBee V1.81 Frame
1x BeeBrain HD G4 Flight Controller ELRS 2.4G
4x Flow 1202 11420kv
8x Gemfan 2512 Propeller tight fit
1x Receiver (ELRS2.4/DJIO3 PNP) 
2x SavageBee HD O3 Canopy 

Not include DJI O3 Camera and Airunit.
Put on your own DJI O3 system plug it in and ready to go.

Binding and Receiver Setting:
For ELRS2.4G Binding, you will need to power up the drone 3 times to get ELRS receiver into Binding mode. 
If you like to switch to O3 internal receiver, you can change the setting on betaflight, follow video

3D Printed File :Download

Design Credit: SavageBee HD O3 Canopy design by Jason Suter AKA ossumdesigns

Video: 






Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
P
Phillip Baker
Better than the usual Newbee Experience

Unlike my previous experience with the acrobee65 that showed up inoperable, and they failed to replace, I took the insurance out on this because Newbee isn’t known for quality or customer service. I also ordered the ultra naked air unit just for this drone because the under performance of the acrobee75 with full-size air unit was a huge disappointment. The combination of ultra naked o3 and Savagebee is very nice. Park cruising I could get close to 5 minutes of flight time. More aggressive flying will lower that, but the power to weight ratio is nice. The problem with this configuration lies is the o3 cage provided being brittle, and when the cheap material breaks, it makes the o3 unit very vulnerable. After a couple days, I decided it wasn’t worth the lose, so I took out the ultra naked and installed the normal o3. The weight definitely brings down the experience. Handling and flight times are cut. It’s still a fun craft, but it hurts to know how much better it could be with a stronger o3 cage.
The pros: responsive, fast, easy set up,
The cons: low quality materials used for 03 cages

I would only recommend buying this if you have access to a 3d printer. If not, they’re going to nickel and dime their customers with these cages. If you have a 3d printer or a durable o3 cage that will fit, this is a must have. I’ve been using the remaining acrobee75 cages, and I like them. It puts the props in view and condenses the center of mass.

M
Mostafa Bakir
Great drone.

Flies like my 4 inch. Great small package.

J
Jason Murphy
Fun little bugger.

I've out 10-12 packs and love it. Agile and fluid flying - decent battery times on a 550mah, love the 03 air unit.