seem to like these over the bibade (venom) and quad blade most of the time. pretty durable and inexpensive to replace or swap different colors
T
T. Franks
Great Props for Lower KV Motors
Anything below 23KV and these are what you want. Durable and effective.
I
Ian Beaty
Better Control and Can Turtle Now!
I was running the stock Gemfan biblades on my Mobul6 HDZero and with these triblades I get a lot more grip and most importantly I can turtle, even on smooth indoor concrete! They are a game changer for racing!
E
Ewiley
Excellent props for your 65mm whoop
great control and efficiency for a 3 blade prop. Better than the stock newbeedrone props on the hummingbird IMO, though they are a little heavier with bigger hubs
I used this 4pin connector, Frsky archer m+ with latest ota firmware updates and Taranis radio.Removed the 0 ohm component and unplugged the antennas from the FT. With the help at Rc an Go using inverted s-port from m+ to TX on flight control (blv3), select f-port in receiver settings on the radio and of course reciver settings in beta flight, f-port ,uart 2 taps and stuff hope this help anyone trying to get better range using Frsky and acroobee v3 because maybe those hair antennas should be actual u.fl they are weak in comparison.
This GM10 GPS/Compass works better than many of my more expensive GPS/Compass Matek hardware. Far more sat locks then expected 15-18 Sats, that was a sock with how low a price this unit cost. I'm going to replace a few of my Matek GPS units with these and get a couple of extra's to have on hand.
I was pretty impressed with the construction of this drone. I've run four packs through it and have had some rough landings but this thing is solid. The battery connector is well placed, just a little short to allow for quick connections/disconnections. The BNF runs props out, so you'll want to remember that when you set it up. Hoping to get an AOS 7" and 3.5" CINE in the future.
0
Added to CartCheck Out Continue ShoppingYou have items in your cartYou have 1 item in your cartTotal
