DJI O4 Air Unit Pro (MP66)

This version comes with the MP66 Gyro. Warranty via DJI Customer Support.

This item does not qualify for any warranty through the NewBeeDrone store. By purchasing this item, you acknowledge and accept these terms and conditions.

These units come unactivated and in their original DJI packaging. The packaging has been opened by one of our technicians to perform the swap. Each unit has been tested to ensure clean gyro data and no "camera calibration error" is present.

The DJI O4 Air Unit Pro elevates FPV flight experiences with superior imaging and extended transmission range. Equipped with a 1/1.3-inch image sensor, it records stunning 4K/120fps video and supports a 155° ultra-wide FOV, capturing immersive visuals with exceptional detail.

The dual-antenna design helps maintain a robust connection with a maximum range of up to 15 km, while ultra-low latency of 15 milliseconds provides real-time responsiveness. It is a strong choice for pilots looking for a compact HD FPV air unit with high-quality recording, reliable O4 transmission system performance, and support for freestyle and racing builds.

<span class=DJI O4 Air Unit Pro camera and air unit" width="1184" height="888">

Specifications:

  • Weight: Approximately 32 grams
  • Image Sensor: 1/1.3-inch CMOS
  • Video Resolution: Up to 4K at 120 frames per second
  • Field of View (FOV): 155° ultra-wide
  • Color Mode: 10-bit D-Log M
  • Video Transmission Resolution: 1080p at 100fps
  • Latency: As low as 15 milliseconds
  • Maximum Transmission Distance: Up to 15 kilometers
  • Internal Storage: 4GB built-in, expandable via microSD card
  • Antenna Design: Dual-antenna
  • Mounting Hole Distance: 33.5 × 33.5 mm
  • Height: 13 mm
  • Cooling System: Improved cooling capabilities with ground low-power mode
  • Standby Time (Ground Low-Power Mode Enabled): Up to 2.5 minutes
  • Power Input: Supports 2-6S LiPo batteries (7.4V – 26.4V)
  • Video Encoding: H.265
  • Maximum Video Transmission Bitrate: 60 Mbps
  • Racing Mode: Supports up to eight aircraft racing simultaneously with video transmission latency as low as 15 milliseconds
  • Canvas Mode: Supports Betaflight OSD settings for customizable on-screen display
  • Operating Temperature Range: -10°C to 40°C
  • Storage Temperature Range: -20°C to 60°C
  • Supported Video Formats: MP4 (H.264/MPEG-4 AVC)
  • Firmware Upgrades: Supports firmware upgrades via DJI Assistant 2 (DJI FPV Series)
  • App Compatibility: Compatible with DJI Fly app for settings adjustment and live view
  • Warranty: 1-year limited warranty

<span class=DJI O4 Air Unit Pro specifications and compatibility" width="1184" height="800">

Compatibility:

  • Goggles: Compatible with DJI Goggles 2, DJI Goggles Integra, DJI Goggles 3, and DJI Goggles N3.
  • Remote Controllers: Supports DJI FPV Remote Controller 2 and DJI FPV Remote Controller 3.
  • Drone Frames: Suitable for drone frames of 3 inches and above, supporting flexible assembly for a variety of creative flight scenarios.
  • Flight Controllers: Compatible with flight controllers that support Canvas Mode and Betaflight OSD settings.
  • Third-Party Remote Controllers: Supports third-party remote controllers with other protocols; an additional receiver is required.
  • Flight Control Protocol: To use the DJI FPV Remote Controller, the flight control protocol must be set to SBUS.
  • Analog Video Transmission Systems: When used with other racing drones that use analog video transmission, it is recommended to keep the goggles at least one meter apart and manually select the distribution frequency and adjust the appropriate video transmission power.
  • Accessory Compatibility: Shares partial accessory compatibility with the DJI O3 Air Unit; please check the accessory compatibility list before purchasing.
  • Software Compatibility: Compatible with Gyroflow software for offline post-stabilization.
  • ND Filter Compatibility: The DJI O4 Air Unit Pro Camera Module can be used with the DJI Avata 2 ND Filter Set (ND8/16/32).
  • Regulatory Compliance: Complies with FCC, CE, and SRRC standards.
  • Note: Third-party flight goggles are not supported.

<span class=DJI O4 Air Unit Pro installed in FPV drone setup" width="1184" height="800">

Package Includes:

  • DJI O4 Air Unit Pro
  • Camera Module
  • Two Antennas
  • 3-in-1 Cable
  • Mounting Hardware
  • User Manual

DJI O4 Air Unit Pro (MP66) with 1/1.3-inch CMOS, 4K/120fps, 15 ms latency, dual antennas, and DJI Goggles compatibility.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
w
wes peterson
Solid

Good to go. No issues works exactly the way it should.