Hummingbird V4 BNF Whoop with SmartMax 400mw VTX ELRS2.4G

(NX69 Battery Connector) 

All Hummingbird V4 will comes with NX69 Plug Started Aug 29 2025

Price Update Notice: Due to recent tariff increases, the product price will be adjusted to reflect the higher import costs. Thank you for your understanding.

ALL Hummingbird V4 comes with Random Color



Specifications:

Drone Size: 65mm
Flight Controller: Hummingbird V4 with SmartMax 400mw VTX ELRS2.4G AIO Flight Controller

 

Available Soon
Frame: Cockroach V3 65mm Brushless Ultra Light Frame 
Motors: Hummingbird 0702 Motor 30000KV  Available Soon
Propellers: Azi Tri-Blade 31mm Propeller Random Color
Camera: BeeEye Camera
Canopy: Goober Canopy v2 Random Color with Camera 3DPrinted adapter


Total Weight of the Drone without battery:

-19.5g (PP Material Cockroach65 v3 frame)

 


Hummingbird V4 ELRS AIO Flight Controller Specs:


MCU: STM32F411
GYRO:BMI270
VTX:  25mw for Racing/ 100mw and up to 400mw SmartMax temperature control with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS pre-flashed with Bluejay 0.19.2 Target: O-H-10 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: 2.4G Antenna with MHF3 connector
Flight Controller Weight: 4.57g(Include antennas and battery connector) 
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1S Only
Uart1: free
Uart2: free
Power Plug: NewBeeDrone NX69 Connector

SPI ELRS3.x receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.x or above version. You will need to update your remote controller ELRS to 3.x version because betaflight 4.5 will no longer support any lower version of 3.0)
Please read through the SPI base information if you have difficulty with binding

Recommended Batteries:

NitroNectar 300mAh 1S NX69 HV

Firmware

Hummingbird V4 Betaflight firmware: 
Betaflight_HMBV4 2025.12 SPI Elrs 3.X
Betaflight_HMBV4 2025.12 SPI Elrs 4.X

What’s included: 

1x Hummingbird V4 BNF Whoop with SmartMax 400mw VTX ELRS2.4G
(Batteries are not included with the product.)
1x Azi Prop 31mm 1.0 random color. 1set. 

Warning: 

This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.

If you mess up the setting? 

Important Notice: If you experience issues with your drone, do not flash the firmware. Simply perform a factory reset using the configuration tool (e.g., Betaflight Configurator) and then do an accelerometer calibration. For further assistance, please contact our support team.

Binding procedure:

To bind, connect to USB power or a battery source. Push the bind button on the front bottom of the flight controller to trigger the binding mode. Bind it to your radio controller. (Note: The Hummingbird v4 only supports ELRS 3.x or a later version. If your remote controller is ELRS 2.5, you will need to update your ELRS TX Module.)

*This aircraft is intended for hobby and recreational use only. Operation on amateur (HAM) radio channels or higher power levels may require a valid HAM license. The integrated video transmitter ships with default, region-compliant channels and power settings enabled.

Video:

Review Video: 




Hummingbird V4 Wire Diagram:

Customer Reviews

Based on 123 reviews
80%
(98)
12%
(15)
5%
(6)
1%
(1)
2%
(3)
H
Harry Ballard
Awesome Whoop

Great Whoop out of the box. Rips for a 1S well. My friends were commenting on how well it flies. On the OSD they even talk a bit of smack if you crash which was hilarious and a nice touch which I wont spoil. Great whoop that is well made and rips is the bottom line. Buy extra batteries as you will need them because you won't want to stop flying. The only thing I wish was updated is that the board is still a micro USB connector while pretty much everything else has migrated to USB-C. That is minor because I still have a bunch of micro USB cords but if you don't keep that in mind.

J
Jordan F Anderson
Good flight, okay camera, horrible soldering job

This is my first drone ever. Started flying and I loved it. Had it for about a month now, and I feel like the drone doesn't wanna fly. The motors have 3 wires soldered onto them, that go into the FC/ESC via a plug. Pretty standard I assume for beginner drones, but I have had issues with the soldering. Last week, I hit one of my gates (covered in pool noodles btw), and one of the wires broke free of the solder. Wouldn't fly. Luckily I have a friend who helped me solder it back on, and got it working again while I ordered a soldering kit for myself. Took it out this weekend for indoor flying. Barely bumped a wall and the same thing happened to a totally different motor. I had my rates lowered dramatically since I was flying indoors and it still happened. The soldering kit hasn't came in yet so now I gotta wait since I don't wanna ask my buddy again, I wanna do it myself. Two wires broke free in roughly 6 batteries. This is shoddy work. I expect this kind of work from myself since I've never soldered before, but a drone company? Where's the QA? If you buy this drone, get a soldering kit with it because you're gonna need it.

K
Koby Paulson
Awesome

Great micro drone!!

D
Diesel

Fast delivery. Everything in good ahape. Very happy!

W
William Hanson

Having fun with it.