RadioMaster ExpressLRS USB UART Flasher V2

The RadioMaster ExpressLRS USB UART Flasher V2 is an essential tool for FPV enthusiasts and drone pilots looking to upgrade their ExpressLRS systems effortlessly. This versatile USB flasher allows users to quickly flash firmware onto their ExpressLRS receivers and transmitters, ensuring optimal performance and access to the latest features. Designed for convenience and ease of use, the Flasher V2 simplifies the process of maintaining and upgrading your equipment, allowing for seamless updates without the need for complicated setups.

Featuring a user-friendly interface, the RadioMaster ExpressLRS USB UART Flasher V2 is compatible with a wide range of ExpressLRS devices, making it a versatile addition to any FPV pilot's toolkit. Its compact design allows for easy transport and storage, ensuring you can take it wherever your flying adventures lead you. Whether you’re tuning your setup for better range, updating to the latest software, or troubleshooting, this flasher streamlines the process, keeping your gear in top condition and enhancing your overall flying experience.


Upgrade your ELRS firmware with ease using our simple and effective tool. The new V2 version features a USB-C interface, enabling you to connect the tool to your PC via cable. The new power button allows effortless power cycling with a single press, eliminating the need to struggle with cables while holding down buttons. Our streamlined design makes preparing your receiver for a firmware update faster, easier, and more efficient than ever!

When it comes to updating your ELRS receivers, you're faced with two options: Wi-Fi or Serial Port. While Wi-Fi upgrading may seem convenient, it can be unreliable due to network instability. This can result in a bad flash, requiring recovery with a UART tool. That's where the V2 ExpressLRS USB UART Flasher comes in, offering a reliable and easy solution for your firmware upgrade needs.

With the RadioMaster V2 ExpressLRS USB UART Flasher, your wireless connection won't be a concern. This dongle is specifically designed for ELRS receiver serial port upgrades, providing a reliable and easy solution for flashing or recovering receivers with a bad flash. 

Our USB flashing tool is a versatile solution, not limited to ELRS serial port upgrades. It comes with a range of connection options, allowing easy connection to our entire range of receivers. By switching between 3.3v and 5v, it can also be used for other devices requiring a UART interface. This versatility makes it a valuable addition to your toolkit, catering to all your firmware upgrade needs.

RadioMaster ExpressLRS USB UART Flasher V2

Features

  • Upgraded USB-C interface
  • Power button for easy ON/OFF power cycling
  • Reverse polarity protection
  • Over-voltage protection 
  • Switchable power supply between 3.3V and 5V
  • Standard 2.54mm pins
  • RM-CRSF JST-GH port for simple plug-n-play connection with RadioMaster ER series receivers
  • Pin sockets included
  • Dupont cables for convenient testing

RadioMaster ExpressLRS USB UART Flasher V2RadioMaster ExpressLRS USB UART Flasher V2RadioMaster ExpressLRS USB UART Flasher V2RadioMaster ExpressLRS USB UART Flasher V2RadioMaster ExpressLRS USB UART Flasher V2RadioMaster ExpressLRS USB UART Flasher V2

Compatible Receivers

Using 2.54mm pin output and spring-loaded pin adapter or Test hook adapters:

Using regular 2.54mm pin output (Servo plugs):

Please note: The second channel is repurposed as a TX for the serial port tool's RX port, while the third channel is repurposed as an RX connected to the serial port tool's TX port.

Firmware upgraded by RM-CRSF interface output:

Please note: The above receivers can be connected to the receiver's CRSF port using a 4-wire CRSF cable.

Firmware upgrade instructions

  1. Connect the Serial Port Cable with the receiver
  2. Connect to the computer with a USB extension cable, press the receiver's BOOT button, then press the POWER button on the serial tool
  3. Follow the ELRS upgrade tool's instructions to complete the upgrade

Download

Size

RadioMaster ExpressLRS USB UART Flasher V2

Package Includes

  • 1 * RadioMaster ExpressLRS USB UART Flasher V2
  • 1 * Pogo Probe
  • 1 * CRSF Wire 
  • 1 * 2.54mm Serial Port Cable - Type B
  • 1 * Serial Port Test Hook - White
  • 1 * Serial Port Test Hook - Green
  • 1 * Serial Port Test Hook - Red
  • 1 * Serial Port Test Hook - Black
  • 1 * User Card

RadioMaster ExpressLRS USB UART Flasher V2

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)