A Fusion of the best: The image processing developed by BrainFPV, the OSD and UI by Achilles, and the hardware engineered and manufactured by TBS. When the brightest minds of the FPV industry work together, being the best at merging two analog video streams was simply not good enough!
Through active video fusion, the displayed video instantly has less breakup and more range, without color-deterioration or video desync often experienced at the edge of reception. A state-of-the-art OSD engine drives cutting edge interactivity, while reducing the need for on board OSD. The TBS Fusion both raises the bar at reception quality and paves the way for system-wide integration with TBS Crossfire and other devices.
In a nutshell, the TBS Fusion has more range, better signal in indoor or other critical environments, and ultimate compatibility with your Crossfire radio link. The included lap timer and spectator modes for staying freestyle- or race-events are an added bonus!
Currently in alpha stage, the Crossfire integration promises a seamless user experience for any FPV pilot. The first stage will see synchronized VRx/VTx channel changes and ability to modify any CRSF device setting via your goggles (Crossfire, Unify Pro/Pro32, compatible Flight Controllers, etc). The second phase will add interactivity on levels never seen before. Exciting times are ahead, and in the usual TBS way, the hardware is already built to be compatible with future software updates and future products.
- Compatibility: Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, HDO
- External Power Kit: Included. Required for older goggles that can't deliver enough power, or for connectivity
- RF Sensitivity: -96dBm
- Power: 5V @ 340mA, 500mAh with connectivity enabled
- Fatshark Attitude compatibility:¬†will require trimming of goggle plastic case to fit
- Upgrade with: TBS Agent X V2.0.21 or higher
- Collaboration with: BrainFPV (video fusion), AchillesFPV (UI), TBS (hardware)
- 1 x TBS Fusion Module
- 1 x Cover and Button (Black)
- 1 x Power Mod PCB
- 2 x Power Mod Ribbon Cable
- 1 x 90d SMA Adapter
I installed the Fusion module to my new HDZero goggles and the analog image is amazing. I have testes with everything from 65mm whoop to 5 inch freestyle. They all look great and have solid reception.
Oops, part of the previous review was meant for the BDI Digidaptor!
The TBS Fusion is great too. Great reception and image quality with my older whoops and drones using a variety of cameras and VTXs. Using with the BDI Digidaptor, DJI Goggles v2, an TBS omni stubby and TBS patch, and haven't had any issues so far. The interface takes a little getting used to but it is very functional.
Using with BDI Digidaptor and DJI Goggles v2. Install was super quick, and didn't require any soldering or hackjob on the goggles. fits and looks nice on the front of the goggles. like the power button, cable management, and power splitter cable so I can power the DJI goggles and TBS fusion from one battery (suggest 4S ~4000mah personally). just be sure to get the correct XT60-to-DC barrel plug adaptor (DC5.5 2.1). The XT60-to-DC plug adaptor that comes with the NewBeeDrone repair kit soldering iron does not work!
Was very conflicted about which module to buy for my dominator v3s, After much research I settled on the Fusion module, mainly for the interface and price range. Was a little worried about wiring the power source, but it turned out to be far easier than I had expected. Suited up with my rhcp patch/omni combo I've been able to cover every corner of my property without any breakup. Extremely happy with the module and so thankful for the goodies newbeedrone sent with it! Hoping this module will last a very long time and when it goes out i'll be replacing it with the same model!!
This is mainly for my dji v2 goggles using the uruav analog adapter. It works well and gets the job done.