• 
• 
• 

Holybro SiK Telemetry Radio V3

The Holybro SiK Telemetry Radio V3 is an essential tool for drone enthusiasts and professionals alike, offering reliable long-range communication between your ground station and aircraft. This telemetry system provides a seamless link for real-time data transmission, allowing you to monitor important flight parameters and telemetry data on-the-fly.

Designed for versatility and ease of use, the SiK Telemetry Radio V3 supports a range of configurations and can be easily integrated with various flight controllers. With a robust transmission range, this radio ensures that you stay connected with your drone, even at extended distances. Its compact and lightweight design makes it suitable for various applications, from racing to aerial photography.

Equipped with advanced features such as automatic baud rate detection and telemetry protocol support, the Holybro SiK Telemetry Radio V3 enhances your flying experience by providing critical information about your drone's status. Upgrade your telemetry capabilities and take full control of your aerial missions with the Holybro SiK Telemetry Radio V3, ensuring a smooth and reliable connection throughout your flights.

Overview

This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground).

This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station. It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot.

The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate for your country/region.

Features

• Open-source SIK firmware
• Plug-n-play for Pixhawk Standard Flight Controllers
• Easiest way to connect your Autopilot and Ground Station
• Interchangeable air and ground radio
• Micro-USB port (Type-C Adapter Cable Included)
• 6-position JST-GH connector

Specification

• 100 mW maximum output power (adjustable) -117 dBm receive sensitivity
• RP-SMA connector
• 2-way full-duplex communication through adaptive TDM UART interface
• Transparent serial link
• MAVLink protocol framing
• Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
• Error correction corrects up to 25% of bit errors Open-source SIK firmware
• Configurable through Mission Planner & APM Planner
• FT230X / FT231X is a USB to BASIC UART IC

Dimensions

• 28 x 53 x 10.7mm (without antenna)
• SiK Telemetry Radio V3 -433MHz(1pc):20.7g 
  SiK Telemetry Radio V3 -915MHz(1pc):22.7g 

Electrical Data

• Supply voltage: 5V DC (from USB or JST-GH)
• Transmit current: 100 mA at 20dBm
• Receive current: 25 mA
• Serial interface: 3.3 V UART

FCC IDENTIFIER: 2AP22-HT03-V3

Package Included

Manual:

Some Tips: