The NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S is the latest in our annual BeeBrain series, showcasing the 5th generation of our flagship flight controller. Every year, we raise the bar by introducing cutting-edge improvements, and the BLV5 is no exception. This powerful 75mm analog whoop pairs the advanced BeeBrain BLV5 flight controller with a robust hardware setup, including 0804 14000KV motors on a 2S power configuration, delivering incredible power and long flight times.
Even with a compact 450mAh 2S battery, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S achieves an impressive 4:30 minutes of freestyle flight and up to 6:30 minutes of hovering. With a TXCO UART-based ELRS diversity receiver for extended range and a 400mW VTX featuring smart power control, this whoop is designed to provide stable connectivity and performance, making it the perfect companion for outdoor adventures.
Built with the FPV community in mind, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S reflects our commitment to innovation and excellence. Whether you’re racing or practicing freestyle, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S offers the agility, range, and reliability you need to excel, making it the ultimate choice for pilots seeking a versatile and high-performing whoop.
Intelligent Smart-Max Power Control: Smart-Max technology dynamically adjusts VTX power output based on real-time temperature monitoring to prevent overheating and protect your VTX hardware. It automatically reduces power when needed and boosts output to 400mW when temperatures allow, ensuring maximum signal strength and stable video transmission.
Flow 0804 14000KV Brushless Motor Longevity and enhanced power Great for 1S and 2S battery setups
Fly with Confidence:
Includes accessories to improve durability (prop guards) TCXO Crystal Oscillator ExpressLRS dual-antenna receiver delivers rock-solid signal transmission, making it perfect for any flight environment NewBeeDrone Cockroach75 frame with a lifetime warranty, designed to withstand the toughest conditions and provide long-lasting performance.
High-Performance Camera:
Runcam Nano4 Camera with Goober Canopy V2, ⅓ inch sensor offering enhanced low-light performance and better protection Adjustable angle for different flying styles
Unleash Your Power:
Carbon Fiber Baseplate provides the most robust frame performance Sturdy design for freestyle flying or racing
Ready to Fly:
Professionally tuned PID settings for out-of-the-box performance, allowing you to fly confidently right from the start. No need for additional setup—just power up and take off!
Compact Size:
75mm frame size Weight: 36.4g (without battery) Fits standard 1S and 2S batteries
Enjoy longer flights with high-capacity battery
2S 550mAh:
Up to 6mins 30s Flight time Up to 7mins 30s Hovering Time
2S 650mAh:
Up to 7mins 30s Flight Time Up to 9mins Hovering Time
2S 850mAh:
Up to 9mins Flight Time Up to 11mins Hovering Time
The flight time was measured under ideal conditions and may vary depending on actual flying habits and environment
Power On the Receiver: Connect the receiver to a USB port or power it on three times. The blue indicator LED will start a double-blink pattern, signalling that it’s ready for binding. Ensure you are using firmware version 3.x to enable successful binding.
Prepare Your Remote Controller: Ensure that your remote controller is running ELRS 3.x firmware.
Start the Binding Process: Once the LED on the receiver begins double-blinking, proceed with the binding process on your remote controller.
Make sure both devices are running compatible firmware versions to ensure a smooth binding process.
If you mess up the setting?
Important Notice: If you experience issues with your drone, DO NOT flash the firmware. Simply perform a factory reset using the configuration tool (e.g., Betaflight Configurator) and then do an accelerometer calibration. For further assistance, please contact our support team at support@newbeedrone.com
I really wanted this to be the best BNF I've owned. On the first flight, I lost a prop. On flights two and three, i lost 2 other props (always a different one). After changing all the props, things were fine. After a normal landing, the accelerometer and gyroscope no longer read and nothing has resolved the issue. I love the company, I love buying US. Hopefully, this was just a bad one.
D
David McKnight
Really wanted to love it
Great company and they will always have my business, but I got 2, and both were non functional in under 5 flights with no tuning and no crashes or impacts.
I’m genuinely sad.
S
Samuel Keyes
Awesome Drone!!!
I love my new drone…one of the best form NewBeeDrone yet!!