NewBeeDrone FETTec InfinityAIO G4 Flight Controller

Introducing the NewBeeDrone FETTec InfinityAIO G4 Flight Controller, a robust, high-performance solution that ensures reliability and protection for your drone. This controller is designed with a unique infinityAIO concept, offering the first-ever dust and moisture-proof design with a built-in FETTec system. With two CNC aluminum heatsinks encapsulating all electronic components, it excels in heat dissipation and shields the flight controller from environmental hazards.


The NewBeeDrone FETTec InfinityAIO G4 Flight Controller is engineered for demanding conditions, from racing to freestyle and cinematic drone applications. It features an STM32G474 MCU, an MPU6000 gyro for stable flight dynamics, and a 6-pin DJI FPV Air Unit connector. With ESCs capable of handling 45A continuous current and 55A bursts, it supports Dshot 300-2400 for high-resolution motor control.


This NewBeeDrone FETTec InfinityAIO G4 Flight Controller supports 3-6S power input and provides 12V 2A power for the DJI FPV Air Unit, making it ideal for advanced FPV setups. Additionally, the controller offers FETTec OSD support for analog builds, buzzer readiness, and multiple UART ports for flexible connectivity. Weighing just 19.4 grams, it fits perfectly into 30.5x30.5mm mounting configurations.

Specification:

Microcontroller Unit (MCU) Specifications:

  • MCU: STM32G474 Running FETTec Alpha Firmware 0.7-62
  • Gyro: MPU6000
  • 4x STM32G071 @64MHz FETtec ESC MCU Running FETTec ESC Firmware 1.0-241

Connectivity:

  • 6-Pin DJI FPV Air Unit Connector
  • Micro USB Connector
  • UART1: DJI Connector
  • UART2: Used for Receiver
  • UART3: Free (also connect to Fettec Analog Onboard OSD)
  • UART4: Free
  • UART5: Used for ESCs / TLM / Onewire
  • OneWire BUS with up to 8kHz looptime (one cable for all Motor signals and Telemetry)

Power Specifications:

  • Continuous Current 45A and 55A Burst ESC
  • Dshot 300-2400
  • 3-6S Battery Input
  • 12V 2A Design for DJI FPV Air Unit
  • 5V 3A Power supply for external LED or GPS module
  • Recommended build tips

    This board supports up to 55A burst current per ESC channel. For optimal performance and to prevent damage, it is recommended to avoid using motors larger than 2306.5 size or motors with a KV rating higher than 2150KV on a 6S setup. Exceeding these specifications may result in potential ESC burnout.

Physical Characteristics:

  • Dimensions: 41x37x7.6mm with 30.5x30.5mm Mounting Holes
  • Weight: 19.4gr with grommets, 18.8gr without grommets

Additional Features:

  • FETTEC OSD support for Analog build
  • Buzzer Ready
  • 4x LED

Package Contents:

  • 1x Infinity FETtec AIO Flight Controller + ESC
  • 1x DJI O3 Cable 100mm (Silicon wire)
  • 2x 16Pin Cable 150mm (Teflon wire)
  • 13x Nylon Lock Nut
  • 5x Steel Screw M3x14
  • 4x Grommets Short, 4x Grommets Long
  • 1x 470uf 35v Electrolytic Capacitor
  • 1x XT60 Cable

Note For Analog Build:

Analog build will need to setup Serial 3 to talk to the internal Analog OSD Chips.
Please follow the setting below to enable the Analog OSD chips. 
Settings>FC Setup>Serial 
MSP Port1   - Serial3 

Video:


 

Wire Diagram: 


NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram1NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram2NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram3NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram4NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram5NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram6NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram7NewBeeDrone FETTec InfinityAIO G4 Flight Controller wire diagram8

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Arturas Pulkauninkas
👌

👌

C
CHRIS HARBOTTLE
Fettec aio

It’s a great AIO makes the build so clean and great delivery time too.

R
Rolanas Rinkunas
Perfect Flight Controller

Good quality product, just what I expected.